Skip to content
Shop Floor Insight app iconShop Floor InsightTime capture

Setup and Run Time Tracking for Microsoft Dynamics 365 Business Central

When setup and run time are lumped together, nobody can tell whether a long operation was a slow changeover or a slow run, and routing standards never get corrected. Shop Floor Insight captures setup time and run time separately: the traveler carries one barcode for setup and another for run, and the operator scans whichever one matches the work.

Each time card line keeps its own setup and run values, so supervisors and planners compare each against the expected time on the routing.

How Setup and run time tracking works in Shop Floor Insight

  1. The traveler for a production order prints with separate setup and run barcodes for each operation.
  2. The operator scans their badge and then the setup barcode when the changeover begins.
  3. When the machine is ready, the operator scans the run barcode; setup time closes and run time starts.
  4. When the operator scans the next activity, run time closes on that operation.
  5. In Business Central, the approval worksheet compares setup and run time with expected time and flags the exceptions.

Key capabilities

Distinct barcodes per operation

The production order traveler prints a setup barcode and a run barcode for each operation. Scanning the setup barcode starts setup time; scanning the run barcode closes setup and starts run time.

Separate values on the time card

The operator's time card shows run time and setup time as separate fields for each operation, and the line posts to Business Central with both values intact.

Checked against expected time

In time card approvals, validation messages point out lines where setup time or run time exceeds the expected time, so supervisors review the outliers rather than every line.

Input for routing review

Actual setup and run times are what Routing Analysis compares against routing standards, so the separation on the floor pays off in better routings.

Time unit by station, user, or work center

Time can be recorded in hours, minutes, or days, set per station, per user, or per work center.

See Setup and run time tracking on screen

Real screens from Shop Floor Insight, shown with demo data.

Details that matter on the floor

No judgment call at the end of the shift

The split happens at the moment of the changeover, by scan, rather than being estimated later from memory.

Exceptions surface on their own

Because setup and run are stored separately, a validation message can say exactly which one ran long, which shortens the conversation with the operator.

Who uses Setup and run time tracking

Machine operators

Scan the setup barcode for the changeover and the run barcode for production.

Production managers

Compare actual setup and run time with the routing to find where standards are off.

Cost accountants

Post labor with setup and run separated so production order costs reflect the actual work.

Questions about Setup and run time tracking

Can Business Central track setup time separately from run time?

Yes, with Shop Floor Insight. Operators scan a setup barcode and a run barcode for each operation, and the time card line records setup time and run time as separate values in Business Central.

Do operators have to remember to switch?

They scan the run barcode when production starts. That one scan closes setup time and opens run time, so there is no separate clock-off step.

How do supervisors spot setups that ran long?

The time card approvals worksheet validates lines when it opens and shows messages such as setup time exceeding the expected time.

Can we analyze actual against standard?

Yes. Time card lines can be analyzed in Business Central, Excel, or Power BI, and Routing Analysis compares captured actual times with routing standards.

Shop Floor Insight app icon

Part of Shop Floor Insight

A manufacturing execution system (MES) for barcoded time capture and employee time management.

Have a question about Setup and run time tracking?

Send us a note and the Shop Floor Insight team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions