Skip to content
Safety Logbook app iconSafety LogbookRisk and follow-up

Safety Risk Assessment for Microsoft Dynamics 365 Business Central

A single severity rating hides the near miss that could have been serious, and a team that only reacts to actual harm misses the events most worth acting on. Safety Logbook rates potential severity, actual severity, and probability on each log, and assigns a risk priority code you define. This is a completely free app from Insight Works for Business Central.

The ratings sit on the log with the event, so risk can be compared across events and used to decide what gets attention first.

How Safety risk assessment works in Safety Logbook

  1. A log is created for an incident, near miss, or hazard.
  2. The logger rates potential severity and actual severity.
  3. The logger chooses a probability rating and a risk priority code.
  4. The safety team reviews logs by risk priority and decides on follow-up actions.

Key capabilities

Potential severity

Record how bad the event could have been. A pallet that nearly fell on someone can be rated critical even if nobody was hurt.

Actual severity

Record how bad it actually was, so the gap between what happened and what could have happened is visible.

Probability

Rate how likely the event is to happen again, such as remote or occasional.

Risk priority code

Assign a priority from a list you set up in the Safety Log Risk Priority Code List, so the team agrees on what each level means.

Visible on the list

Risk priority code and probability appear on the safety log list, so high-priority events stand out in the event log.

Printed for review

Severity, probability, and risk priority print on the summary report with the rest of the log.

See Safety risk assessment on screen

Real screens from Safety Logbook, shown with demo data.

Details that matter on the floor

Near misses are rated on what could have happened

Separate potential and actual severity let a near miss carry a high risk priority even though nobody was hurt.

Your own scale

Risk priority codes come from your own list, so the levels match the scale your safety program already uses.

Who uses Safety risk assessment

Safety managers and health and safety officers

Rate risk consistently and decide what to address first.

Operations managers

See which hazards and areas carry the highest risk priority.

Executive leadership

Review how many high-priority events were logged in a period.

Questions about Safety risk assessment

Why rate potential and actual severity separately?

So a near miss that could have been serious is recorded that way, even if the actual harm was minor or none.

Can I define my own risk priority levels?

Yes. Risk priority codes come from the Safety Log Risk Priority Code List, which you can add to.

Where do the ratings appear?

On the Safety Log Card, on the safety log list, and on the Safety Logbook Summary report.

Safety Logbook app icon

Part of Safety Logbook

Streamline incident tracking and compliance, enhancing workplace safety and reducing risk.

Have a question about Safety risk assessment?

Send us a note and the Safety Logbook team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions