Skip to content
Quality Inspector app iconQuality InspectorReporting

First Article Inspection Report (AS9102 Form 3) for Microsoft Dynamics 365 Business Central

Aerospace and other regulated manufacturers must prove that the first part from a new or changed process meets every requirement on the drawing. Building that first article inspection report (FAIR) by hand from inspection notes is slow and easy to get wrong.

Quality Inspector produces a FAIR Form 3, the characteristic accountability form defined by the AS9102 aerospace standard, from the inspection recorded in Business Central.

How First article inspection report (AS9102 form 3) works in Quality Inspector

  1. Build a template for the first article inspection, with a field for each characteristic on the drawing.
  2. Record the balloon and characteristic numbers for each characteristic.
  3. Inspect the first article and record the results on the test.
  4. Create NCRs from the test for any nonconforming characteristic.
  5. Run the FAIR Form 3 report from the test.

Key capabilities

Form 3 from the test

Quality Inspector generates the FAIR Form 3 report from the values recorded on the inspection, not from a separate document.

Balloon and characteristic numbers

Each characteristic carries its balloon and characteristic number, so the report lines match the drawing.

Linked nonconformances

Creating an NCR from a test sets the NCR test number automatically, which feeds the FAIR Form 3. See Nonconformance Reports.

Standard templates and tests

First article checks use the same templates, grades, and records as any other inspection.

Details that matter on the floor

The record and the report agree

Because the report comes from the test, the values on Form 3 are the values recorded in Business Central.

Tied to the part and lot

The first article inspection stays linked to the production order, item, and lot it covers.

Who uses First article inspection report (AS9102 form 3)

Regulatory compliance officers

Produce AS9102 Form 3 reports from Business Central.

Quality engineers and quality assurance managers

Plan first article inspections and review results.

Quality control inspectors

Record each characteristic against its balloon number.

Questions about First article inspection report (AS9102 form 3)

Can Business Central produce an AS9102 first article inspection report?

Yes, with Quality Inspector. Quality Inspector produces a FAIR Form 3 for AS9102 and similar standards from the inspection recorded in Business Central, with balloon and characteristic numbers.

What is FAIR Form 3?

Form 3 is the characteristic accountability part of a first article inspection report under AS9102. It lists each design characteristic with its requirement and the measured result.

Can I change the report layout?

Yes. Quality Inspector reports are kept simple so layouts can be customized.

Quality Inspector app icon

Part of Quality Inspector

Streamline your quality control process to reduce rework and maximize customer satisfaction.

Have a question about First article inspection report (AS9102 form 3)?

Send us a note and the Quality Inspector team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions