Skip to content
Quality Inspector app iconQuality InspectorSampling

AQL Sampling for Microsoft Dynamics 365 Business Central

Testing every unit of a large lot is slow and often destroys the product, so food, pharmaceutical, and high-volume manufacturers inspect a sample. Working out the sample size and the number of failures allowed by hand, for every lot, invites mistakes.

Quality Inspector supports acceptable quality limit (AQL) sampling. Set the inspection level and sampling plan, and the test derives the sample size and the accept and reject points from the lot quantity.

How AQL sampling works in Quality Inspector

  1. Set a default inspection level and acceptable quality limit on the template.
  2. A test is created for a lot, and Quality Inspector reads its quantity.
  3. The test shows the sampling plan, sample size, and acceptance and rejection points.
  4. The inspector records each sample in the sample worksheet.
  5. The test passes or fails against the accept and reject points.

Key capabilities

Derived sample size

The test reads the lot quantity, inspection level, and sampling plan code, then sets the sample size, acceptance point, and rejection point.

Defaults from the template

A template can carry a default AQL grouping code, inspection level, and acceptable quality limit, so tests start with the right plan.

Your own numbers

Override the derived values with your own sample size and allowable failures, or define the sample as a fixed quantity or a percentage.

Early termination

An AQL failure grade ends the whole test as soon as a critical sample fails, so the inspector does not complete the remaining samples.

Sample entry

Record each sample in the sample worksheet, with statistics rolling up to the test result.

See AQL sampling on screen

Real screens from Quality Inspector, shown with demo data.

Details that matter on the floor

Fewer units handled

Inspectors test the number of units the plan calls for, not the whole lot, and the plan is applied the same way on every test.

Stop at the first critical failure

When one sample fails a critical check, the test fails immediately and the inspector moves on.

Sampling at receipt

Combined with receiving inspection, sampling lets a large delivery be checked without unpacking all of it.

Who uses AQL sampling

Quality assurance managers

Choose inspection levels and acceptable quality limits for each product.

Quality control inspectors

Know exactly how many units to pull and when a lot has failed.

Regulatory compliance officers

Show that each lot was sampled to a defined plan.

Questions about AQL sampling

Does Business Central support AQL sampling?

Yes, with Quality Inspector. Set the inspection level and sampling plan, and each test derives the sample size and the accept and reject points from the lot quantity.

Can I use my own sample size instead of AQL tables?

Yes. Override the derived sample size and allowable failures, or define the sample as a fixed quantity or a percentage of the lot.

Does an inspector have to finish every sample after a critical failure?

No. An AQL failure grade ends the test as soon as a critical sample fails.

Can sampling skip lots that do not need testing?

Yes, through skip lot settings. See Skip Lot.

Quality Inspector app icon

Part of Quality Inspector

Streamline your quality control process to reduce rework and maximize customer satisfaction.

Have a question about AQL sampling?

Send us a note and the Quality Inspector team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions