Skip to content
Dynamic Ship app iconDynamic ShipPacking

Scanner-Driven Packing with Pack Commands for Microsoft Dynamics 365 Business Central

On a busy packing desk, every reach from the scanner to the mouse and keyboard slows the line. Pack commands are barcodes that each trigger an action on the Dynamic Ship Package Worksheet, the screen where shippers pack and label orders in Business Central, such as opening a box, rating the shipment, or printing the label.

Your packers keep their hands on the box and the scanner and run the whole packing sequence from one scan field.

How Scanner-driven packing works in Dynamic Ship

  1. The packer scans the order barcode in the Scan Here field to load the order onto the Package Worksheet.
  2. The packer scans –NEW, or a License Plate Template barcode that carries preset box dimensions, to open a package.
  3. The packer scans each item into the box and confirms quantity, lot, or serial number when prompted.
  4. The packer scans –PACKDETAIL to set or confirm dimensions and weight.
  5. The packer scans –GETLABEL to rate the shipment and print the carrier label.
  6. The packer scans –POST to post the order and complete the shipment.
Video thumbnail: Pack commands in Dynamic Ship
Pack commands in Dynamic Ship A video on packing by barcode scanner with pack commands on the Dynamic Ship Package Worksheet in Business Central.

Key capabilities

A barcode for each action

Package Worksheet actions have matching barcodes, including –NEW (open a package), –PACKDETAIL (set dimensions and weight), –GETLABEL (open the Rate Worksheet), –POST, –PACKALL, –QUICKLABEL, –GETRETURN, –CUSTOMS, and –CLEAR. Each command also has a short abbreviation and a text version a packer can type at a station without a scanner.

One scan field all day

The Package Worksheet stays open with a single Scan Here field. The packer scans commands and items in sequence without switching to the keyboard.

Command chaining

Combine several commands into one barcode, such as –NEW–PACKDETAIL or –PACKALL–GETLABEL, so a frequent multi-step action takes one scan. Turn it on by setting Chain Multiple Commands to Enabled in Dynamic Ship Setup.

Custom command barcodes

Create, combine, and reorder commands to match how your desk packs, then build a short cheat sheet of the five or ten barcodes your team uses most.

Cheat sheet at each station

Print the Dynamic Ship Pack Commands report and laminate a copy for each packing station. Scanning –HELP in the Scan Here field brings the barcoded report up on screen.

See Scanner-driven packing on screen

Real screens from Dynamic Ship, shown with demo data.

Details that matter on the floor

Repeated steps become one scan

Where the same steps repeat shipment after shipment, a supervisor chains them into one barcode, so a routine pack takes fewer scans. Chaining is turned on in Dynamic Ship Setup.

Rating inside the same flow

The –GETLABEL command opens the Rate Worksheet, which compares rates across your connected parcel, less-than-truckload (LTL), and full truckload (FTL) carriers. Orders, items, item tracking, packages, rates, and labels stay on one Business Central screen.

Who uses Scanner-driven packing

Packing-station operators and shipping clerks

Use pack commands as their main daily tool: scan to open a box, scan items in, scan to rate and label, and scan to post, then repeat for the next order.

Warehouse supervisors

Set up cheat sheets and chained barcodes for each station so the floor follows a consistent sequence.

High-volume domestic shipping desks

Gain the most, since a few seconds saved on a repeated motion add up across many packages a day.

Questions about Scanner-driven packing

What are pack commands in Dynamic Ship?

Pack commands are barcodes that trigger Package Worksheet actions in Dynamic Ship for Business Central. Scanning –NEW opens a package, –PACKDETAIL sets dimensions and weight, –GETLABEL rates and labels, and –POST posts the order. Each command also has a short abbreviation and a text version.

Can I combine multiple pack commands into one barcode?

Yes. Command chaining places several commands in one barcode, for example –NEW–PACKDETAIL or –PACKALL–GETLABEL, and one scan runs them in order. Turn it on by setting Chain Multiple Commands to Enabled in Dynamic Ship Setup.

Do I need special hardware to use pack commands?

You need a barcode scanner at the packing station, typically a USB scanner connected to the PC, and the free Free3of9 barcode font to print the command barcodes. Insight Works recommends printing the Dynamic Ship Pack Commands report and laminating one copy per workstation.

Can I create my own pack command barcodes?

Yes. You can create, combine, and reorder pack commands to fit your packing process. Many desks pair them with License Plate Template barcodes, which carry preset box dimensions, so one scan opens the right box and sets its dimensions.

Dynamic Ship app icon

Part of Dynamic Ship

Easily add carrier integration, real-time shipping rates, package management and shipment tracking to Business Central.

Have a question about Scanner-driven packing?

Send us a note and the Dynamic Ship team will reply by email. Ready to plan a rollout? Contact your Microsoft Partner.

Ask a product question

Product Questions