Home › Forums › Product Configurator › Smart Item No Configuration

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Ralph MUser InsightWorks
      Post count: 2

      I can’t find any detailed explanation of creating Smart Item No Configurations. Also an explanation of each of the available options and their uses is required.

      Smart Item No Choices

      Terri Vaive
        Post count: 514
        Upvote
        Up
        0
        Down
        Not Helpful
        ::

        Hello,

        The Smart Item No. Configuration feature can be used to give a descriptive value of the configuration being built verses a conventional number series that would typically be applied. There are a number of ways to build this description based on the “Type” field selected.

        For example, to use the Smart Item No. Configuration feature from your Configurator Item Categories page using Type “Choice Code”:

        • Choose Smart Item No. (under the Item No. Behavior column) for the intended Item Category Code
        • Select Smart Item No. Configuration for the selected Item Category Code line
        • On the first line, select Type “Choice Code” and enter your Code under “Option Code”
        • On the second line, select Type “Constant” and enter a dash (-) under the “Constant” column (optional line break to better display information)
        • Repeat step 3 and continue adding your desired Code fields

        You can then test your Smart Item No. Configuration from the Configurator BOM Designer page by choosing Actions then Test Item No.

        Thank you,

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.