Home › Forums › Shop Floor Insight › Client Configurations – overview screen

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • ANDREW OLSENANDREW OLSEN
      April 7, 2022 at 8:07 am
      Post count: 11
      #7932

      https://kb.dmsiworks.com/knowledge-base/configure-client-configuration-in-shop-floor-insight/ makes mention of

      • Configuration for overview screens
        • For example, “Today’s Production Orders” in a common area.

      What would be the appropriate set up for this configuration? Would we need to have an “employee” barcode to scan in order to bring up the default screen? We’re hoping to be able to show each shop floor area exactly what the example states, “Today’s production orders” on a screen separate from the screen they normally use to clock in and out of production orders. Thanks in advance!

      Olina ThorsteinsdottirOlina Thorsteinsdottir
        April 11, 2022 at 11:18 am
        Post count: 22
        #7957

        The most common way to setup per scanning station, is to use the scanning stations IP address for that scanning station in the Shop Floor Client configuration. Once you clock on it will show you a separate screen/View from what you see before clocking on, if you would like a new design or new screen then that would have to be custom development.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.