Home Forums Shop Floor Insight Consumption and Output setup Reply To: Consumption and Output setup

Insight Works
Post count: 30

That error will be displayed when the Shop Floor Client configuration card used by the scanning station does not have a consumption batch defined for it.

A similar error will be displayed referencing the output batch if the client configuration card does not have an output batch defined for it.

To correct this error:

  1. Navigate to “Shop Floor Client Configurations”
  2. Find the client card that corresponds to the scanning station. (There could be one or many client cards)
  3. In the “Production Order” fast tab, there is a field called “Consumption Batch Name”
  4. Select a batch name where the consumption entries will be saved.
  5. If the error displayed relates to output, find the “Output Batch Name” field on the same fast tab and select a batch name where the output entries will be saved.
  6. Close the client card.
  7. Reload the scanning station with CTRL-F5
  • This reply was modified 2 years, 3 months ago by Insight Works.
  • This reply was modified 2 years, 3 months ago by Insight Works.