Home Forums Warehouse Insight In “ship” menu, scanning barcode to select item also fills the qtty field Reply To: In “ship” menu, scanning barcode to select item also fills the qtty field

Insight WorksErik Garstad
    Post count: 19

    Hi Fares,

    It sounds like the Zebra DataWedge profile for the Warehouse Insight application may not be configured correctly. Please ensure the configuration is done according to these instructions:

    1. From the Android settings menu, open DataWedge.
    2. Select the Warehouse Insight profile.
    3. Select Application Assignment. If there is no blue Warehouse Insight icon next to the “*” entry, you will need to delete and recreate this entry.
      1. Tap and hold the entry until you get the option to delete the entry and delete it.
      2. Tap on the three dots in the top right corner and select to add a new entry.
      3. Scroll down the list and select com.insightworks.warehouseinsight. This list is alphabetical.
      4. Next select the “*” option.
    4. In the Keystroke output section, clear the enabled checkbox.
    5. In the Intent Output section. Configure this section as follows:
      1. Intent Output: Enabled.
      2. Intent action: whibarcode
      3. Intent category: Make sure this is blank.
      4. Intent delivery: Broadcast Intent.
    6. Disable basic data formatting and advanced data formatting.
    7. In the Warehouse Insight app Tap on Menu > Configure (Default password is 1234) > Menu > Barcoding. Configure these settings as follows:
      1. Barcode Wedge: Android Intent.
      2. Intent Action: whibarcode
      3. Intent Category: Make sure this is blank.
      4. Intent Barcode String: com.symbol.datawedge.data_string