MxAPS: Error Messages and Fixes

MxAPS: Error Messages and Fixes

Created On
Last Updated On
byInsight Works
You are here:

The following table contains MxAPS’ error messages and their corresponding fixes.

Error Message How to Fix
Capacity Unit of Measure not supported. MxAPS supports minutes or seconds. Use Minutes or Seconds.
Please Flag a result to use as active. Navigate to the Schedule Result list, and flag a result as active.
Please set a Schedule Result to be active first. Navigate to the Schedule Result list, and flag a result as active.
Please set a Schedule Result to be active first in the MxAPS Schedule Result List. Navigate to the Schedule Result list, and flag a result as active.
This set of results cannot be deleted because there are still production order routings lines that reference it. No actionable set of steps, you cannot delete the results while it’s on an active order.
This set of results cannot be deleted because there are still production order lines that reference it. No actionable set of steps, you cannot delete the results while it’s on an active order.
This set of results cannot be deleted because it is marked as active. Please activate a different set of results first. Set a different result to be active.
This set of results cannot be deleted because it is marked as active. Please set a different result to be active first. Set a different result to be active.
Please set the Schedule Result Nos on the MxAPS Setup page. Missing setup exists. Correct the missing setup by setting the Schedule Result Nos.
Invalid date on an order line being applied error. Exclude the results.
Can not apply these results while there is an invalid date on an order line. Generate a new schedule and use a filter to exclude the bad production order line: %1-%2-%3 Exclude the results.
Integration Problem: the supplied schedule result does not match the order schedule. Work with the developer of the extension or customization.
Integration Problem: the supplied schedule result does not match the order schedule. Your system might have an extension or customization that needs to be re-configured. Work with the developer of the extension or customization.
Please generate a schedule first. Generate a schedule first before committing the result.
Please make a schedule result active first. Set an existing schedule to be active first.
Could not find [%1]. Please contact product support. Contact product support for assistance in retrieving a configuration package to apply.
Missing a production order line for: %1 Contact your system administrator and remove this orphaned data record.
Missing a production order line for: %1. Contact your system administrator for help removing this orphaned record. Contact your system administrator and remove this orphaned data record.
Please double-check the page reference on the MxAPS Setup Card. No page metadata was found. This page might not exist anymore and may need to be reconfigured. Navigate to the MxAPS Setup card, and correct the action to take and object ID setting.
Please double-check the page reference on the MxAPS Setup Card. This page might not exist anymore and may need to be reconfigured. Navigate to the MxAPS Setup Card and correct the Action to Take and Object ID setting in the Schedule Behavior group. Navigate to the MxAPS Setup card, and correct the action to take and object ID setting.
Unsupported capacity unit of measure is configured, please use Seconds,Minutes,Hours,or Days. Choose Seconds, Minutes, Hours, or Days.
Unsupported capacity unit of measure is configured. Please use Seconds, Minutes, Hours, or Days. Choose Seconds, Minutes, Hours, or Days.
This capacity unit of measure is not supported. Please choose Seconds, Minutes, Hours, or Days. 100/hour and blank for the capacity unit of measure is not supported by MxAPS.
Machine Center %1 is missing a Work Center No. Please navigate to the Machine Center Card, assign it to a Work Center and then try again. Navigate to the Machine center.
Unclear how to drag an mx operation schedule to this table: %1. You can only drag to Machine Centers and Work Centers from an MxAPS data source. Please generate a schedule first.
Please generate a schedule first from the MxAPS Generate a Schedule page. Before running a visual view of schedule results.
Absolute Allowance must be greater than Idle Allowance duration. The Absolute Allowance must be greater than the Idle Allowance.
Default allowances must be greater than or equal to zero. Set the default allowances to be greater than or equal to zero.
The default allowances must be greater than or equal to zero. Set the default allowances to be greater than or equal to zero.
Another Setup Elimination for the same Item, Capacity, Setup Elimination Code and Production Segments already exists. Fix is clear in error message.
Another Setup Elimination entry for the same Item, Capacity, Setup Elimination Code and Production Segments already exists. Fix is clear in error message.
Alternate Group %1 cannot be deleted because it is referenced by Routing %2 Operation %3. Fix is clear in error message.
Alternate Group %1 cannot be deleted because it is referenced by Routing %2 Operation %3. Remove this Alternate Group from the routing line first. Fix is clear in error message.
Alternate Group %1 cannot be deleted because it is referenced by unfinished Operation %2 of %3 Production Order %4, Line %5. Remove this Alternate Group from the Routing Line first. Fix is clear in error message.
Alternate Group %1 cannot be deleted because it is referenced by unfinished Operation %2 of %3 Production Order %4, Line %5. Remove this Alternate Group from the Prod. Order Routing Line first. Fix is clear in error message.
Unable to generate a schedule. Please ensure your filters are not excluding all results and try again. Fix is clear in error message.
%1 Production Order %2 Line %3 Operation %4 has a very large %5 duration. Please review the Prod. Order Routing Line before generating a schedule. Fix is clear in error message.
MxAPS Setup Segment Code Defaults for Setup “%1”, Run “%2”, or Replenishment “%3” could not be found. See more details at %4

https://kb.dmsiworks.com/knowledge-base/mxaps-4-1-upgrade-actions/‘

 Fix is clear in error message.
The Item No. “%1” for Production Order Component Line %2 on %3 Production Order %4 Line %5 is blank or could not be found. Fix is clear in error message.
Thank you for using MxAPS. You need at least one MxAPS Schedule Configuration first. You can get one by running the assisted setup wizard for MxAPS. Fix is clear in error message.
Hi, you need to be registered to perform this MxAPS task. Contact your Insight Works reseller for help with this. Fix is clear in error message.
Absolute Allowance duration must be greater than Idle Allowance duration. Fix is clear in error message.
The Absolute Allowance must be greater than the Idle Allowance. Fix is clear in error message.
The Processing Order of the To Segment must be greater than or equal to the Processing Order of the From Segment. Fix is clear in error message.
Hi, you need to be registered to perform this MxAPS task. Contact your Insight Works reseller for help with this. Fix is clear in error message.
Absolute Allowance duration must be greater than or equal to zero. Fix is clear in error message.
The processing order of this segment must be greater than or equal to the processing order of the From Segment. Fix is clear in error message.
The processing order of this segment must be less than or equal to the processing order of the To Segment. Fix is clear in error message.
The timing of this field must be after or at the same time as the Consume From value. Fix is clear in error message.
The timing of this field must be before or at the same time as the Consume To value. Fix is clear in error message.
The Unit of Measure of the Replenishment Segment must be in minutes. Fix is clear in error message.

For more information and assistance, contact Support.

Was this article helpful?
0 out Of 5 Stars
5 Stars 0%
4 Stars 0%
3 Stars 0%
2 Stars 0%
1 Stars 0%
How can we improve this article?
Please submit the reason for your vote so that we can improve the article.
Need help?
Tags:

Leave A Comment

Go to Top