The following describes how to set up PrintNode and configure Business Central to let you print from your handheld to a local printer.

Files Attached: FalconX4-Wifi, FalconX3-Wifi

When scanning barcodes in a noisy environment it can be hard to hear the notification indicating that the scan was successful. To get the maximum audio notification there are 2 places to check audio settings on the handheld.

To allow the Warehouse Insight web service to work with NTLM, you just need to make one small change to the ‘web.config’ file.

A handheld scanner needs to be provisioned before it can use Warehouse Insight. The Warehouse Insight desktop client should already be configured and functional before configuring scanners.

Warehouse Insight extension has to be installed and Warehouse Insight Setup Wizard has to be completed.

If a scanner goes into power save mode or drops the wifi connection the Warehouse Insight app will need to reset and log back in each time.

Warehouse Insight services are configured for each instance of Business Central, and so when additional services are required for Dev/Test/Production they can be set up as shown below.

A handheld scanner needs to be provisioned before it can use Warehouse Insight.

Issue: Reclass (bin to bin move) entries being overwritten by another scanner. Cause: Multiple scanners using the same Device/PDA Configuration Code, where a Reclass Journal Batch has been hardcoded.

You can add a custom image to the home screen of the Warehouse Insight application on your device. This can be useful if you want to display corporate branding information, or if you have multiple device configurations and you want to see which configuration your device is using at a glance, without having to go into the configuration menu on the device.