---
title: "13. Shipping"
app: "Warehouse Insight"
section: "How-to guides"
last_updated: "2022-02-18"
url: "https://insight-works.com/kb/warehouse-insight/shipping/"
---

# 13. Shipping

Note: For earlier versions of Warehouse Insight, find the documentation [here](/kb/warehouse-insight/introduction-2/).

The Ship application is responsible for handling outbound transactions. Supported outbound transactions are:

- Sales Orders
- Transfer Orders
- Warehouse Shipments

Core features of this application include:

- Lookup Lists for Outbound Transactions
- Specifying Quantity to Ship (including Item Tracking information)
- Posting

You can access the Shipping application from the Home screen by clicking the **Ship** link. When launched the _Shipping Lookup List_ page will be displayed.

 Note: This document will describe processes specific to Warehouse Shipments. Sales/Transfer Order handling is almost identical and has been left out. For more information, please contact Support.

### Shipping Lookup List

The _Lookup List_ page allows you to either scan or select the Shipping Document you need to view.

 Note**:** The maximum number of documents that appear in this list is configured in the _Warehouse I_nsight Setup page via the Document Max List property (defaults to 100).

Use the filter bar to filter the lookup list to specific documents, if required.

The Shipping Lookup List can be filtered by typing into the Search Filter. The following data is supported for searching:

- **Document Number**: Shipping Documents that have a No. matching the filter will be displayed.
- **External Document No.**: Documents that have an External Document No. matching the filter will be displayed.
- **Source No.**: Any Warehouse Shipments that have a Source No. (e.g., Sales Order, Transfer Order, or Assembly) on the lines that match the filter will be displayed.

By default, only Released shipping documents are shown. You can toggle this to show Open documents by setting the _Only Show Released Shipments_ option to **No** in the _Device Configuration_ page.

If Logins are enabled, only documents that are un-assigned or explicitly assigned to the logged in user will be shown. If you wish to see all documents, regardless of assignment, the _Show All Documents_ option must be checked on the _Device Configuration_ page.

 Note**:** To further enhance or change the Lookup List logic, you will need to override event _SHIPPING::GetDocumentList_ (ID: 70002) to implement the required logic.

![Shipping](/wp-content/uploads/kb-legacy/Shipping.png)

#### Shipping Lookup List Columns

The Shipping Lookup List can show the following columns:

| Column | Description |
| --- | --- |
| No. | This will either be the Sales Order, Transfer Order, Assembly Order or Warehouse Shipment number. If the Device Configuration Card is set to Use Source Doc. and using Warehouse Shipments, this column is the Sales Order, Transfer Order, or Assembly Order number. The Warehouse Shipment number can instead be referenced in the Doc # column, if needed. |
| Document No. | This is either be the Sales Order, Transfer Order, or Warehouse Shipment number. |
| Assigned User ID | The User ID the document is assigned to. |
| Due Date | The data the document is due by: - Warehouse Shipment Line – Due Date - Sales Header – Due Date - Transfer Header – Shipment Date |
| Reference No. | - Warehouse Shipment Header – External Document No. - Purchase Header – External Document No. - Transfer Header – External Document No. |
| Source No. | The source document for the Warehouse Shipment. For locations not using Warehouse Shipments, this column is blank. |
| Customer Name | The Sell-to Customer Name. For Transfer Orders, this column is empty. |
| Barcode | The generated barcode that is used if a line is selected. This column does not need to be shown. |

### Shipment Document

When your location requires Warehouse Shipments, the _Shipping_ page will look like this:

![Shipping](/wp-content/uploads/kb-legacy/14.2-Shipment-Document-300x277.png)

| Callout ID | Description |
| --- | --- |
| 1 | The available menu options: - Close - Post - Print - Change Quantity - Enter Bin - Enter Item - Enter License Plate - Start/Stop License Plate - Hide/Show Completed - Item Inquiry - Bin Inquiry |
| 2 | The Total Remaining Quantity or Lines to ship for the document. |
| 3 | Document number and related header information. |
| 4 | The Document Lines. |
| 5 | Quantity to Ship, Description, and other Line details. |
| 6 | Status bar indicating status messages or instructions. |

 Note**:** You can modify the columns shown by modifying the Device Columns for the events _SHIPPING::GetSalesOrder_ (ID: 70000), _SHIPPING::GetWhseShipment_ (ID: 70005), and _SHIPPING::GetTransferOrder_ (ID: 70011). Note**:** If you have Logins enabled on the handheld, the Shipment can be automatically assigned to the user logged (when opened) depending on the Device Configuration setting _Assign Document_.

#### Shipping Items

The standard process flow used when shipping items:

1. Scan the Bin to ship from.
2. Scan the Item to ship.
3. Enter the quantity shipped and Item Tracking Information, if required.

See the _General Document Handling_ section on the _Overview_page for more information.

Using Warehouse Shipments, items are shipped from a common bin. You do not require users to scan the Bin to Ship from as there is little chance the user will be making a mistake.

Check the **Ignore Bins** option on the _Device Configuration_ page to disable Bin to Shop requirement:

1. Scan the item to ship.
2. Enter the quantity shipped and Item Tracking Information, if required.

The _Scan Behaviors_ page can be configured to control aspects of this process. For example, you can configure it so that a quantity dialog does not appear but instead increments the count by one, or to change the default quantity or unit of measure to ship.

 Note**:** Since Warehouse Shipments only Ship from a single bin, it is beneficial to hide the Bin column to save view space on the device.

#### Menus

The following menus are available by default for Shipping. Menus may be added or removed as required from the _Device Menus_ page under the _Application_ Form with a selection of _WHSE\_SHIPMENT\_DOC_, _SALES\_OUT\_DOC_ or _TRANSFER\_OUT\_DOC_ for the Application.

#### _Close (Menu)_

Closes the Shipping Document and redirects to the _Lookup List_ page. If a license plate is currently being built, the user is prompted to print the label. If auto post is enabled, then the document is posted prior to closing.

#### _Post (Menu)_

Post the Shipping Document. Users are prompted to confirm that the post should occur. After posting the document, the page closes and redirects to the _Lookup List_ page.

 Note**:** To extend or customize the post routine (Post + Print, etc.) you will need to override events: _SHIPPING::PostSalesOrder_ (ID: 70004), _SHIPPING::PostWhseShipment_ (ID: 70008), or _SHIPPING::PostTransferOrder_ (ID: 70013).

#### _Print (Menu)_

This option is hidden by default but can be made visible via the _Device Menus_ page. Print sends a request to print any configured report(s). You can configure which reports are printed in the Insight Works Report Selections with the _Whse. Shipment_, _Sales Order_ or _Transfer Order_ usage.

By default, the reports must be built with a top level DataItem of the type of document being printed (e.g., Report _Whse. – Shipment_, ID: 7317 if printing a Warehouse Shipment).

#### _Change Quantity (Menu)_

Launches the Quantity dialog for the selected line.

#### _Enter Bin (Menu)_

This option is hidden by default but can be made visible via the _Device Menus_ page. Users are prompted to type in the bin that they wish to simulate scanning. This option is useful if bin labels have become damaged or are inaccessible.

 Note**:** We recommend opening the Bin Inquiry module (see menu options) and reprinting the label.

#### _Enter Item (Menu)_

This option is hidden by default but can be made visible via the _Device Menus_ page. Users are prompted to type in the item that they need to simulate scanning. This option is useful if item labels have become damaged or are no longer readable.

#### _Enter License Plate (Menu)_

This option is hidden by default but can be made visible via the _Device Menus_ page. Users are prompted to type in the license plate number they need to simulate scanning.

 Note**:** License Plate labels can be reprinted via the License Plate module on the handhelds but require exiting the application.

#### _Start/Stop License Plating (Menu)_

Initiates a process flow in which items are shipped and added to a license plate.

See _Building a License Plate_ for more information.

#### _Hide/Show Completed (Menu)_

Toggles whether the received lines (those without Outstanding Quantity) are shown or hidden.

 Note**:** The state of this menu option is saved when the application closes so that next time a Shipment document is opened the hide/show state last used is applied.

#### _Item Inquiry (Menu)_

Launches the Item Inquiry management screen pre-filtered to the selected line.

#### _Bin Inquiry (Menu)_

Launches the Bin Inquiry management screen pre-filtered to the active bin.

### Common Configurations and Requests

This section describes the common Shipping scenarios, requests, and features. These topics apply the same to all document types (e.g., Sales Orders, Transfer Orders, Whse. Shipments). While some topics may require development or customizations, they are included here to provide a greater understanding of what the software is capable of.

For more information, contact Support.

#### Ignoring Bins

You may ignore bins during the shipping process by enabling the _Ignore Bins_ option on the _Device Configuration_ page. This is mostly applicable when using Warehouse Shipments but can also be beneficial when using Sales Orders or Transfer Orders and the bins do not need to be validated.

#### Card View

By default, the document screens are shown in Grid mode. This allows a user to see all expected Shipping lines and scroll through them. If you wish to limit the display to a single line at a time, switch the _Display Mode_ to _Card View_ on the _Device Configuration_ page.

In Card View the display will change to appear similar to this:

![Shipping](/wp-content/uploads/kb-legacy/Shipping-3.png)

Users may still cycle through the lines by pressing the **Previous** and **Next** buttons.

Scanning an item finds the appropriate line and advances the view to that line as needed (e.g., users do not need to scan the item shown on the screen).

 Note**:** The data displayed in the Card is based on the Device Columns visibility. To show/hide fields you may do so by configuring the Device Columns for the appropriate document event.

#### Building a License Plate

If required, a license plate can be built up during the Shipping process using the steps outlined in _Building a License Plate_.

 Note**:** The Shipment lines do not need to all come from the same bin. The first bin shipped from is set on the license plate.

#### Using a License Plate

If required a license plate that has been previously built can be scanned to ship. See _Using a License Plate_ for more information.

 Note**:** The Shipment lines must all have the same bin and match the License Plate Bin. It is not possible to ship a license plate across multiple bins.
