---
title: "Configure Scanner Settings for Memor 10/20 and Skorpio X5"
app: "Warehouse Insight"
section: "Set up"
last_updated: "2026-08-05"
url: "https://insight-works.com/kb/warehouse-insight/configure-scanner-settings-for-memor-10-20-and-zebra/"
---

# Configure Scanner Settings for Memor 10/20 and Skorpio X5

Note: For Zebra configuration, see the [_Configure Scanner Settings for Zebra_](/kb/warehouse-insight/configure-scanner-settings-for-zebra/) page.

For Warehouse Insight to handle scans properly on Memor 10 and Memor 20 scanners, you must enable the intent wedge. The following steps guide you through the process of setting up and enabling the intent wedge on Memor 10 and Memor 20 scanners.

1. Install Warehouse Insight on the scanner.

   1. Scan the WHI APK barcode from the Installation Report in the browser’s URL (puts the link to download the file in the browser’s URL).
   2. Approve permission requests during the download.
   3. Select **Yes** to install (WHI appears on your home screen).
2. Configure scanner settings by enabling _Intent Wedge_ for:

   - Memor 10: Navigate to System and select Scanner Settings.
   - Memor 20: Navigate to Datalogic Settings and select Scanner Settings.
   - Skorpio X5: Navigate to **Settings** / **Datalogic Settings** and select **Scanner & Decoder Settings**.
3. Under Wedge:

   1. Enable Keyboard Wedge on.
   2. Turn Intent Wedge on.
4. Under Formatting:

   1. Set Label prefix to None.
   2. Set Label Suffix to None.
5. Configure Warehouse Insight Barcoding Settings:

   1. Open Warehouse Insight and navigate to **Menu** / **Configure** (default password is 1234) / **Menu** and select **Barcoding.**
   2. Configure as follows:

      1. Barcode Wedge: Android Intent
      2. Intent Action: com.datalogic.decodewedge.decode\_action
      3. Intent Category: com.datalogic.decodewedge.decode\_category
      4. Intent Barcode String: com.datalogic.decode.intentwedge.barcode\_string
