The following table contains Shop Floor Insight’s error messages and their corresponding fixes.
| Error Message | How to Fix |
| “The view is filtered, and the entry is outside the filter”, while looking at Shop Floor Employees, creating a new Shop Floor Employee, or reviewing Shop Floor Time Cards | You are missing a “Shop Floor Function Permission” entry (if you are a person configuring or administering the system) or you are missing sufficient Manages/Reports-To configuration (if you are a supervisor/approver of a group of people). https://kb.dmsiworks.com/knowledge-base/configure-shop-floor-employees-in-shop-floor-insight/ https://kb.dmsiworks.com/knowledge-base/configure-special-permissions-in-shop-floor-insight/ |
| You are not seeing any time cards. | If you do not see any Shop Floor Time Cards but are certain they exist then you are missing sufficient “Manages” and “Reports To” configuration, or you are missing the “Post” flag setting on the “Shop Floor Function Permission”. Ask your Business Central administrator to either give you permission to manage the employee (configured on the Shop Floor Employee card), or if you are approving time cards for all shop floor personnel, or are otherwise an administrator, then set the “Post” flag setting on the Shop Floor Function Permission. |
| You are not seeing any Shop Floor Employees | If you do not see any Shop Floor Employees but are certain they exist then you are missing sufficient “Manages” and “Reports To” configuration, or you are missing the “Post” flag setting on the “Shop Floor Function Permission”. Ask your Business Central administrator to either give you permission to manage the employee (configured on the Shop Floor Employee card), or if you are approving time cards for all shop floor personnel, or are otherwise an administrator, then set the “Post” flag setting on the Shop Floor Function Permission. |
| You are seeing some Shop Floor Employees, but not everyone that you manage. | You are missing “Manages” configuration. Your Business Central administrator will need to navigate to the Shop Floor Employee for your record and configure with the “Manages” button the missing people that you manage. Alternatively if you should be seeing all employees, then you can configure the “Post” flag on the Shop Floor Function permission page for your user. |
| You are seeing some Shop Floor Time Cards but not all that you expect, but you know they exist. | Make sure the time card isn’t already posted. If a time card is posted it will appear in “Posted Shop Floor Time Cards”. If the time card is not posted, and you are certain it exists, then you are missing “Manages” configuration. Your Business Central administrator will need to navigate to the Shop Floor Employee for your record and configure with the “Manages” button the missing people that you manage. Alternatively if you should be seeing all time cards for all employees, then you can configure the “Post” flag on the Shop Floor Function permission page for your user. |
| There is no time card to handle this scan. | Reconfigure Shop Floor. This error will not occur on a system where Shop Floor Insight is correctly configured. |
| YOUREMPLOYEECODE is blocked. Please navigate to the Shop Floor Employee list to investigate further. | You, as a supervisor or administrator, or approver is getting the message while navigating to Shop Floor Employees. The problem is because your Shop Floor Employee that’s associated with your user id is blocked. Because you are blocked, you will not be able to unblock. To resolve you can either ask someone who is not blocked with sufficient permissions to manage the Shop Floor Employees to unblock you, or you can navigate to Shop Floor Function Permissions and make sure that you have the “Post” flag checked. |
| Premature shift ends, or hours before close doesn’t function as expected. | Check your ‘Hours Before Close’ setting on the Shop Floor Setup card, and also make sure your “Shop Floor Webservice” configuration has the correct time zone offset. https://kb.dmsiworks.com/knowledge-base/shop-floor-employees-are-having-their-shifts-end-prematurely/ |
| No production order found to process work center You just scanned a work center %1 without having a production order selected. Please select a production order related time card line first. | Select a time card line for a production order first before scanning a work center barcode. |
| It appears that you are attempting to clock into multiple operations with the filter [%1], but the configuration [%2] is not configured to allow that. Make sure your Time Entry Mode setting is compatible on the Shop Floor Client Configuration card | Make sure your time entry mode on the appropriate Shop Floor Client Configuration is compatible. For most installs this is “Auto – Same Entry Only”. |
| Unable to find the line to delete based on: %1 | Refresh your time card view to update the time card view before trying to delete a time card line. |
| Unable to find line to clock off based on: %1 Unable to find the time card line to clock off based on: %1. Please refresh your view or logout and then login again. | Refresh your time card view to update the time card view before trying to delete a time card line. |
| Unexpected dispatch screen:%1 Your system might have an extension or customization that needs to be re-configured. | You probably have an extension or customization that needs to be re-configured. |
| Clocking off a single entry expects batch id to be set on line [%1], it is empty. | Configure time splitting {insert link to article on time splitting} |
| Clocking off a single entry expects batch id to be set on line [%1], it is empty. Please review the documentation on time splitting. | Configure time splitting {insert link to article on time splitting} |
| Unknown input screen: [%1] | You probably have an extension or customization that needs to be re-configured. |
| Unknown input screen: [%1]. Your system might have an extension or customization that needs to be re-configured. | You probably have an extension or customization that needs to be re-configured. |
| Unknown menu action [%1]. | You probably have an extension or customization that needs to be re-configured. |
| Unknown menu action [%1]. Your system might have an extension or customization that needs to be re-configured. | You probably have an extension or customization that needs to be re-configured. |
| This action requires a selected line. No line was supplied or the line may no longer exist. | Refresh your time card view to update the time card view before trying to delete a time card line. |
| Unknown Capacity Type [%1] AND Unexpected Capacity Type [%1] encountered while trying to register an absence. Your system might have an extension or customization that needs to be re-configured. | You probably have an extension or customization that needs to be re-configured. |
| The time card line [%1]-[%2] based on the input [%3] could not be found. This line no longer exists, which could occur if somebody posts. | Refresh the time card view. Ensure there are no processes where someone is posting or deleting the time card. |
| The time card line [%1]-[%2] based on the input [%3] could not be found. This line no longer exists, which could occur if somebody has posted or deleted the time card. Refresh your time card view and try again. | Refresh the time card view. Ensure there are no processes where someone is posting or deleting the time card. |
| This function is only intended to be used when the buffer is a temporary record. | You probably have an extension or customization that needs to be re-configured. |
| Could not find an appropriate Production Order Line. Please select a line first that is associated with a Production Order Line. %1 | Select a valid line representing valid production order data and try the same action again. |
| Could not find a valid Production Order Line. Please ensure a valid line is selected first that is associated with a Production Order Line. %1 | Select a valid line representing valid production order data and try the same action again. |
| Could not find an appropriate Production Order Routing Line. Please select a line first that is associated with a Production Order Routing Line. %1 | Select a valid line representing valid production order data and try the same action again. |
| Employee [%1] does not exist for input [%2] | Ensure the Shop Floor Employee was not mistyped exists in the company and is not blocked. |
| The Shop Floor Employee [%1] is either blocked or does not exist in the company [%3] based on the supplied information [%2] | Ensure the Shop Floor Employee was not mistyped exists in the company and is not blocked. |
The most common cause of this error is one barcode printed in a different company or database than where it is being scanned. If that is not the problem then it is possible the barcode was cleaned or otherwise deleted and may no longer be valid. Re-print your barcode. Combined with one of the following:
|
The most common cause of this error is a badge that was printed in a different company, or different environment. Re-printing the barcode in the correct company for the environment will usually fix the problem. |
The most common cause of this error is one barcode printed in a different company or database than where it is being scanned. If that is not the problem then it is possible the barcode was cleaned or otherwise deleted and may no longer be valid. Re-print your barcode in the company [%1] Combined with one of the following:
|
The most common cause of this error is a badge that was printed in a different company, or different environment. Re-printing the barcode in the correct company for the environment will usually fix the problem. |
| You are seeing many time card lines with zero runtime. | Follow the troubleshooting guide here: https://kb.dmsiworks.com/knowledge-base/troubleshoot-zero-run-time-entries-on-shop-floor-time-cards/ |
| You are getting “(401) Unauthorized” while setting up or configuring the Shop Floor Insight windows service. | Follow the troubleshooting guide here: https://kb.dmsiworks.com/knowledge-base/how-to-troubleshoot-401-error-messages-in-shop-floor-insight/ |
| You are installing or configuring Shop Floor Insight and while testing the service after installing you are getting any of the following errors in either the Shop Floor Insight service log, or the windows event log: “HTTP could not register URL” “System.Net.HttpListenerException: Access is denied” “Your process does not have access rights to this namespace (see http://go.microsoft.com/fwlink/?LinkId=70353 for details)” | The root cause is the service account that the windows service is running under does not have permission to register the URL ACL. Follow the guide here: https://kb.dmsiworks.com/knowledge-base/installation-issues-in-shop-floor-insight-7-12/ |
| You are installing the Shop Floor Insight windows service, but it fails almost at the end of the service install. | The most common causes are:
In the windows event log this will be logged similar to the below: “Product: Shop Floor Insight — Error 1923. Service ‘Shop Floor Insight – Production’ (Shop Floor Insight Production) could not be installed. Verify that you have sufficient privileges to install system services.” |
| The binding of codeunit 23 was unsuccessful. The codeunit has already been bound. | This binding error is a cascading side effect in Business Central 25.x+ caused when an initial error halts a process that uses item journal posting under the hood. You can resolve it by addressing the preceding error that triggered the original failure, as this binding issue will disappear once the root cause is fixed. Before getting this error message you will have likely received a different error message first. Resolve that other error message first and any other missing Business Central configuration for posting production information, and then this error should go away. |
| You are using the search feature in the production dispatch, and are not finding a result that you expect to be there. | The most common cause is insufficient or incorrect filters. Refer to the following guides: https://kb.dmsiworks.com/knowledge-base/filtering-production-orders/ and https://kb.dmsiworks.com/knowledge-base/troubleshoot-missing-production-dispatch-search-results/ |
|
If unposted time exists while you are trying to finish the production order you will be presented with a warning message. If you ignore the warning and finish the production order before time, consumption, and output is posted then you will not be accurately capturing labor and material costs for the production order. Before changing a released production order (RPO) to Finished, approve and post all related Shop Floor Time Cards, and post any outstanding entries in the Consumption Journal and Output Journal. These entries must be posted while the production order is Released. |
| Production Order 104567 has outstanding Consumption in batch DEFAULT. Navigate to the Consumption journal, find batch DEFAULT, and post it first to have the Consumption recognized before changing status. Do you still want to finish the order? | If unposted consumption or output journal entries exist, a warning identifies the journal type and batch where the consumption or output is recorded. Before changing a released production order (RPO) to Finished, approve and post all related Shop Floor Time Cards, and post any outstanding entries in the Consumption Journal and Output Journal. These entries must be posted while the production order is Released. |
| “Attempted to Divide By Zero” from “Mfg. Cost Calculation Mgt.” when posting production order related consumption, output, or time. |
Business Central configuration errors can surface when posting through Shop Floor Insight. If “Attempted to divide by zero” includes the call stack below, check these settings in Business Central:
Correct the configuration and affected production order values before retrying.
|
| You receive an error message while recording output from the Shop Floor Client that contains the following pieces of text.
“The operation has been finished. Do you want to post output for the finished operation?” “Client callbacks are not supported on Microsoft Dynamics 365 Business Central Server” The order might be swapped depending on the Business Central versions and Shop Floor Insight versions. |
This is occurring because someone or some thing has changed the “Routing Status” on that operation to “Finished”. When it’s Finished Business Central will presume you do not want to record output on a finished operation and raise the error. In the Business Central web client this will be presented as a confirmation dialog, however through web service calls (like through Shop Floor Insight or Warehouse Insight), this will be raised as an error.
To resolve: Do not prematurely finish operation prior to posting output. The operation routing status should only be changed to finish once you have completed output. This error message is indicative of a process problem. |
| “The Inventory Posting Setup does not exist. Identification fields and values: Location Code='<Value>’, Invt. Posting Group Code='<Value>’” | This is a base Business Central error.
You are missing posting configuration for that combination of location code and inventory posting group code (Invt. Posting Group Code) in your Inventory Posting Setup.
|
For more information and assistance, contact Support.
Still need help?
Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.