The Shop Floor Setup page contains the global configuration for Shop Floor Insight. These settings determine how time collection, production reporting, payroll integration, barcode scanning, workflows, projects, production posting, dispatching, and other core features behave throughout the application.
General
| Setting | Description |
|---|---|
| Post Overtime Costs | Applies overtime cost factors when posting Project or Production Order related entries. The overtime factor comes from Shop Floor Pay Codes. Production postings also consider the Use Direct Labor Cost From setting.
Refer to https://kb.dmsiworks.com/knowledge-base/calculate-overtime-in-shop-floor-insight/ for more details. |
| Adjust Overhead for Labor | Includes production overhead when calculating overtime labor costs.
Specifies whether Shop Floor Insight adjusts the Overhead Rate on the production output journal line when it recalculates labor cost during time card posting. This setting only applies when Shop Floor Insight is calculating a replacement Unit Cost for the Item Journal Line. The posting code skips this calculation entirely when Use Direct Labor Cost From is set to Default NAV. When enabled, Shop Floor Insight adjusts the output journal line as follows:
When Use Direct Labor Cost From is set to Custom Codeunit, the behavior is different. Shop Floor Insight runs the configured direct labor cost codeunit, uses the time card line’s Custom Labour Cost as the new unit cost, and then adds the journal line’s existing Overhead Rate to that new unit cost when Adjust Overhead for Labor is enabled. This setting does not post a separate overhead journal line. It changes the cost-related fields on the production output Item Journal Line before the journal line is posted. |
| Adjust Indirect for Labor |
Specifies whether Shop Floor Insight adjusts the Indirect Cost % on the production output journal line when it recalculates labor cost during time card posting. This setting only applies when Shop Floor Insight is calculating a replacement Unit Cost for the Item Journal Line. The calculation is skipped when Use Direct Labor Cost From is set to Default NAV. When enabled, Shop Floor Insight adjusts the output journal line as follows:
When Use Direct Labor Cost From is set to Custom Codeunit, the behavior is different. Shop Floor Insight runs the configured direct labor cost codeunit, uses the Custom Labour Cost returned by that codeunit, and then increases that unit cost by the journal line’s existing Indirect Cost % when this setting is enabled:
This setting does not create separate indirect cost entries. Instead, it adjusts the Indirect Cost % (or, for custom codeunits, incorporates the indirect percentage into the calculated unit cost) on the production output Item Journal Line before it is posted. |
| Hours Before Close | Determines how long a time card may remain inactive before Shop Floor Insight automatically creates a new time card when the employee clocks in again on the following day/shift. |
| Manual Line Splitting Behavior | Controls how manual line splitting behaves during Project approvals, either by adjusting the existing line or creating balancing entries. |
Scanning
| Setting | Description |
| Barcode Format | Specifies the barcode format expected by Shop Floor Insight clients. |
| Scan Logic Control | Determines whether barcode processing occurs on the client or server. New installations should use Server. Legacy installations may continue using Decode Only or Client for compatibility. |
| Scan Control Codeunit | Specifies the server-side codeunit responsible for barcode processing when server scanning is enabled. |
| Scan Control Codeunit Name | Displays the name of the configured scan control codeunit. |
| Action Log | When server-side scanning is enabled, records scan requests in the action log whenever possible. |
Workflow Integration
| Setting | Description |
| Workflow Integration | Enables Shop Floor Insight workflow events and responses for Business Central workflows and approval requests. |
Production
| Setting | Description |
| Output Batch | Specifies the output journal batch used when recording production output. |
| Auto-Finish Operations | Determines when production routing operations are automatically marked as Finished. |
| Operation Status Timing | Controls whether operations become In Progress immediately when employees clock into them or only after posting. |
| Register Output To | Controls whether recorded output is written to the Output Journal, Time Card Line, or uses a hybrid approach where only the final operation uses the Output Journal. |
| Production Output Dimensions | Determines how dimensions are transferred to Output Journal entries. |
| Production Post Codeunit | Optional integration codeunit executed before Shop Floor Insight posts production output. |
| Production Post Codeunit Name | Displays the configured production posting codeunit name. |
Best Practice
For most installations, Output Journal is the recommended destination because it supports item tracking and allows inventory to become available immediately for downstream processes by having a supervisor review, approve, and post the output journal independently from active time cards.
Projects
| Setting | Description |
| Project Journal Batch | Specifies the journal batch used when posting project time. |
| Require Project Approvals | Requires project-specific approval before time cards may be approved. |
| Billable Project Task Filter | Defines which project tasks are considered billable using a Business Central filter rather than a custom field. |
Payroll
Export
| Setting | Description |
| Export Codeunit | Custom payroll export codeunit used for third-party payroll integrations. |
| Export Codeunit Name | Displays the configured export codeunit name. |
| Export Template Name | Optional template used by payroll export integrations such as Serenic. |
| Export Batch Name | Batch used by payroll export integrations when required. |
Numbering
The Numbering section defines the Business Central number series that Shop Floor Insight uses when creating new records. Each setting references an existing No. Series configured in Business Central.
| Setting | Description |
|---|---|
| Time Card Nos. | Specifies the number series used when Shop Floor Insight creates new time cards. Each new time card is assigned the next available document number from this series. |
| Employee Nos. | Specifies the number series used when creating new Shop Floor Employees. |
| Group Employee Nos. | Specifies the number series used when creating employee groups. |
| Config Nos. | Specifies the number series used when creating new Shop Floor Web Client Configurations. |
| Auto-Split Batch Nos. | Specifies the number series used to assign the Batch ID on Time Card Lines when lines are automatically split during a clock-off action. |
Client
The Client section controls the behavior and appearance of the Shop Floor Insight barcode scanning interface, including date and time formatting, barcode scanning responsiveness, login messaging, work instructions, and global dispatch behavior.
General
| Setting | Description |
|---|---|
| Date Format | Specifies the date format used throughout the Shop Floor client. The format string uses standard date and time format specifiers (for example, d.m.Y or D j/M/y) to control how dates are displayed.
Refer to this guide for more details: https://kb.dmsiworks.com/knowledge-base/how-to-change-the-date-format-on-the-shop-floor-insight-client/ |
| Time Format | Specifies the time format used throughout the Shop Floor client. This setting uses the same formatting specifiers as Date Format.
In order to get 24h times instead of AM/PM in the SF web client, you need to set the “Time Format” setting on the SF setup to something such as H:i:s Format Specifier Description Example Value to Display d Day of the month, 2 digits with leading zeros 01 to 31 D A short textual representation of the day of the week Mon to Sun j Day of the month without leading zeros 1 to 31 l A full textual representation of the day of the week Sunday to Saturday N ISO-8601 numeric representation of the day of the week 1 (for Monday) through 7 (for Sunday) S English ordinal suffix for the day of the month, 2 characters st, nd, rd or th. Works well with j w Numeric representation of the day of the week 0 (for Sunday) to 6 (for Saturday) z The day of the year (starting from 0) 0 to 364 (365 in leap years) W ISO-8601 week number of year, weeks starting on Monday 01 to 53 F A full textual representation of a month, such as January or March January to December m Numeric representation of a month, with leading zeros 01 to 12 M A short textual representation of a month Jan to Dec n Numeric representation of a month, without leading zeros 1 to 12 Y A full numeric representation of a year, 4 digits Examples: 1999 or 2003 y A two digit representation of a year Examples: 99 or 03 a Lowercase am/pm am or pm A Uppercase AM/PM AM or PM g 12-hour format of an hour without leading zeros 1 to 12 G 24-hour format of an hour without leading zeros 0 to 23 h 12-hour format of an hour with leading zeros 01 to 12 H 24-hour format of an hour with leading zeros 00 to 23 i Minutes, with leading zeros 00 to 59 s Seconds, with leading zeros 00 to 59 |
| Browser Auto Refresh Time | Specifies a time of day when Shop Floor clients automatically refresh their configuration. Configure this during a non-working period, such as overnight or during scheduled breaks, to minimize disruption. |
| Barcode Timeout | Specifies how long, in milliseconds, the client waits before determining that barcode input has completed. A typical value is 200 ms. |
| Login Message | Specifies the title or message displayed on the Shop Floor client login screen. |
| Config No. Behavior | Determines how client configuration numbers are handled. Use the persistent option when a scanning station should remain assigned to a specific configuration. |
| Webservice Configuration URI | Displays the configuration URI used by the Shop Floor Insight Web Service. This value can be copied into the Shop Floor Insight installer or a web service configuration file. |
Work Instructions
| Setting | Description |
| Work Instructions Time | Controls whether production order time information is displayed in the Work Instructions area of the Shop Floor client. |
| Work Instructions Quantities | Controls whether production order quantity information is displayed in the Work Instructions area of the Shop Floor client. |
Global Dispatch
These settings define the default filtering behavior for the Production Dispatch view.
| Setting | Description |
| Dispatch Row Limit | Limits the maximum number of production orders returned in the dispatch list. |
| Dispatch Filter Start | Determines whether a starting date filter is applied to dispatch results. |
| Dispatch Starting Date Filter | Specifies a Business Central date filter expression for the earliest production orders to include. Dynamic expressions such as -3M may be used. |
| Dispatch Filter End | Determines whether an ending date filter is applied to dispatch results. |
| Dispatch Ending Date Filter | Specifies a Business Central date filter expression for the latest production orders to include. For example, 2M includes production orders up to two months into the future. |
| Dispatch Production Custom Filter | Defines additional production order filters using any supported Business Central filter criteria. |
| Dispatch Project Custom Filter | Defines additional project filters that determine which project documents appear in the dispatch list. |
| Dispatch Employee Filtering | Controls whether production dispatch is filtered by employee assignment. Available options include Do Not Filter, Current User Unassigned, Unassigned, and Current User. |
Payroll Adjustments
Apply Pay Rules to Unapproved allows payroll rules to include closed time that has not yet been approved. Enable this when supervisors need to review calculated overtime before approving time cards. When disabled, payroll calculations use approved time only.
Adjustment Codeunit selects the calculation used to generate payroll adjustments in the Shop Floor Payroll Adjustment Worksheet. For standard daily and weekly overtime calculations, use 23044122 — SFI Default Payroll Rules. Adjustment Codeunit Name displays the selected codeunit’s name. Custom payroll calculations require a compatible codeunit supplied for your installation.
Vacation
Vacation Adj. Codeunit selects the calculation used for vacation accrual adjustments in the payroll adjustment worksheet. The standard codeunit is 23044123 — SFI Default Vacation Adj., which applies enabled vacation accrual rules. Vacation Codeunit Name displays the selected codeunit’s name. Selecting a codeunit does not configure the accrual rules; those must also be configured.
Direct Labor
These settings control the labor cost applied when posting time to production orders. Use them when production costs need to reflect employee labor rates or a separately defined labor portion instead of relying entirely on standard Business Central costs.
Use Direct Labor Cost From provides four choices:
- Shop Floor Work Center: Uses the Labour Portion of Direct Cost on the Shop Floor Work Center.
- Shop Floor Employee: Uses the employee’s Direct Unit Cost.
- Custom Codeunit: Uses a custom labor cost calculation, such as an integration that obtains rates from a payroll system.
- Default: Retains the standard Business Central journal cost without applying Shop Floor Insight’s labor cost adjustments.
Adjust Journal Unit Cost applies when using Shop Floor Work Center or Shop Floor Employee costs. No Adjustment adds the selected labor cost to the existing Business Central unit cost. Deduct Shop Floor Work Center Direct Labor first deducts the Shop Floor Work Center’s Labour Portion of Direct Cost, then adds the selected labor cost. Use the deduction option when the existing cost already includes that labor portion, to avoid counting it twice. Post Overtime Costs also determines whether the paycode’s overtime factor applies to employee labor.
Direct Labor Cost Codeunit is available when Use Direct Labor Cost From is Custom Codeunit. Select the compatible codeunit supplied for your installation. Its calculated cost replaces the journal unit cost, with overhead and indirect costs included according to Adjust Overhead for Labor and Adjust Indirect for Labor. Direct Labor Cost CU Name displays the selected codeunit’s name.
Prepare Time Cards
Preparation Codeunit selects the processing used to prepare time cards. The standard setting is 23044132 — SFI Default Preparation. It removes a final break line with zero run time, calculates rounded login and logout times, clocks off the last open line, applies configured shift break adjustments, and calculates filler time when a filler activity is configured. It also distributes group time when configured.
Preparation runs when time cards are closed and can also be run manually. Preparation Codeunit Name displays the selected codeunit’s name.
Activities
The Activities section defines default activity codes for work, breaks, and unallocated time. These defaults help classify time consistently without requiring employees to choose an activity for every entry.
Default Prod. Activity Code, Default Asset Activity Code, Default Project Activity Code, and Default Service Activity Code provide activity defaults for production orders, fixed assets, projects, and service work. Select existing Shop Floor Activity codes appropriate to each type of work. The production activity must have Prod. Order Required enabled, and the fixed asset activity must have Asset Required enabled.
Breaks
Default Break Activity Code identifies the activity used for break time. Break Unit of Measure specifies whether that time is recorded in seconds, minutes, hours, or days. Automatic shift break adjustments also require the corresponding settings on the employee’s shift pattern.
Automatic Filler
Filler time accounts for the difference between the time card’s login-to-logout duration and its recorded setup and run time. For example, if an employee is logged in for eight hours but has seven hours recorded, filler can account for the remaining hour when the time card is prepared. This can also be used to help track automatic idle time.
Default Filler Activity Code identifies the activity used for this time. An employee-specific filler activity takes precedence over this global setting. To prevent automatic filler entries, leave the filler activity blank in both Shop Floor Setup and the applicable Shop Floor Employee records.
Filler Unit of Measure specifies the unit used for filler time. Filler Behavior controls where it is recorded: Always Use a Single Line uses a dedicated filler line; Find Empty Runtime attempts to reuse a line with the filler activity and zero run time before creating a dedicated filler line.
Filler Source Time selects either Actual Login/Logout or Calculated Login/Logout, which uses rounded times. Filler Restrict Adjustment controls whether only positive filler is allowed or negative filler can also be recorded. Negative filler reduces the total recorded time when it exceeds the login-to-logout duration, so use Allow Negative only when those timestamps reliably represent the period being reconciled.
General — Hours Before Close
Hours Before Close helps Shop Floor Insight determine whether an existing open time card should be reused when an employee next signs in. It compares the elapsed time since the last known clock-off with this setting. If that period exceeds the configured hours, the previous card is closed and a new card can be created. Configure a value longer than normal interruptions within a shift but shorter than the gap between shifts. For example, with 10.5 hours configured and a last clock-off of 5:00 p.m., signing in later than 3:30 a.m. exceeds the threshold. Employees can also close their card explicitly with End Shift.
This setting does not itself schedule background processing.
General — Manual Line Splitting Behavior
This is not related to the ‘Auto Split’ feature, and instead a supervisor/approver feature oriented towards project or job tasks. This is to help enable scenarios where time recorded towards a project might need to be partially billed, allowing some time to be split towards the billable time portion, and a non-billable internal training portion (as an example). Manual Line Splitting Behavior controls how time is moved when a line is split. Create Negative Adjustment retains the original line and creates a negative adjustment for the transferred time, together with a new line containing the transferred time and selected values. Update Original Line reduces the original line directly and creates the new line for the transferred time. Automatic time splitting across work centers for multiple simultaneously clocked on production order related work is not related to this feature, and is configured instead on the Shop Floor Client Configuration and Shop Floor Work center configuration cards.
Production — Auto-Finish Operations
Auto-Finish Operations controls how Shop Floor Insight sets the Finished flag on production output journal entries. Never leaves automatic completion disabled. On Any Entry sets the flag when a relevant journal entry is created, including entries without output quantity. On Partial Qty. sets it when a nonzero output quantity is supplied. On Full Qty. sets it when the accumulated output reaches the operation’s Input Quantity; the calculation includes previously posted output and output already present in journals. An explicit completion instruction or an operation already marked Finished can also cause the flag to be set.
Production — Register Output To
Output Journal records reported output in the output journal, allowing output to be reviewed and posted separately from labor time. Time Card Line retains the output quantity on the time card line until time card posting and does not support specifying output item tracking through that option. Time Card Unless Last Oper. retains intermediate-operation output on time card lines and sends final-operation output to the output journal. Recording an output journal entry does not by itself make the inventory available; the journal must also be posted.
For most scenarios “Output Journal” is the most appropriate option as it allows:
- Output to be posted as an independent process before time cards are posted, allowing output from production work areas to be put-away, moved to another area, or shipped.
- Lot tracking and serial tracking.
- Separate approval processes.
Production — Production Output Dimensions
Copy From Time Card Line transfers populated dimensions from the time card line to the output journal. Use Default Dimensions retains the dimensions established by the normal journal creation and Business Central defaulting process. Choose the latter when time card dimensions should not override the dimensions otherwise obtained for the production entry.
Production — Production Post Codeunit
Production Post Codeunit is an optional legacy customization hook used during production time posting. It receives the populated Item Journal Line after Shop Floor Insight has filled its fields and performed its labor-cost calculation, before posting. It allows additional installation-specific processing of that journal line. Leave it blank when no such integration is required. Modern extensions can instead subscribe to Business Central’s OnBeforeRunWithCheck integration event in codeunit 22, Item Jnl.-Post Line, to inspect or adjust the journal line as it enters standard posting. This occurs after Shop Floor Insight’s journal preparation and labor-cost calculation. Because the event also runs for other item journal postings, restrict the subscriber to the intended production Output entries, using the SFI Time Card No. and SFI Time Card Line No. fields to identify their Shop Floor origin. Leave IsHandled false when extending standard posting.
Projects — Require Project Approvals
Require Project Approvals adds project-level approval before the overall time card can be approved. Configure Person Responsible on each applicable project. That resource must match the resource connected to the Shop Floor Employee who will approve the project time. Enabling the setting without configuring these relationships does not establish who can perform the approval.
Projects — Billable Project Task Filter
Billable Project Task Filter identifies which project tasks Shop Floor Insight treats as billable. Use the field’s filter builder to define the qualifying project-task criteria. This replaces the older Shop Floor-specific billable flag on project tasks.
Payroll — Payroll Processing and Cost Posting
Shop Floor Insight collects and classifies time, applies configured time adjustments, and exports time to payroll systems. The payroll system remains responsible for calculating payroll. Post Overtime Costs is a separate costing feature: it allows a paycode’s Overtime Factor to influence costs posted to projects or production orders. For projects, the factor applies to the resource cost. Production costing also depends on Use Direct Labor Cost From.
Payroll — Export Configuration
Export Template Name and Export Batch Name identify the destination payroll journal when required by the selected export integration, such as Serenic. Other export integrations may use these fields differently or may not require them. Selecting an export codeunit does not configure the receiving payroll system.
When the selected export codeunit is recognized as an ADP export, Configure ADP Export becomes available. This opens the separate ADP Export Setup page. The lookup on Export Codeunit Name also opens that setup when the ADP export is selected.
Payroll — Direct Labor Cost Calculation
Use Direct Labor Cost From determines how Shop Floor Insight adjusts the Unit Cost on production output journal lines created when posting time cards. For Shop Floor Employee and Shop Floor Work Center, the calculation starts with the existing Business Central journal Unit Cost and adds the selected Shop Floor labor cost.
| Setting | Labor cost source |
|---|---|
| Shop Floor Employee | Direct Unit Cost on the Shop Floor Employee. |
| Shop Floor Work Center | Labour Portion of Direct Cost on the corresponding Shop Floor Work Center or Machine Center. |
| Default | Retains the existing Business Central journal cost without applying Shop Floor Insight’s labor-cost calculation.
If you aren’t sure which setting to use, use this setting, this will work for most standard Business Central processes. Other settings are used when you need to adjust the cost. |
| Custom Codeunit | Runs Direct Labor Cost Codeunit and uses the time card line’s Custom Labour Cost as the replacement journal Unit Cost. |
Adjust Journal Unit Cost
For Shop Floor Employee and Shop Floor Work Center, No Adjustment adds the selected labor cost to the existing journal Unit Cost. Deduct Shop Floor Work Center Direct Labor subtracts the corresponding Shop Floor center’s Labour Portion of Direct Cost before adding the selected labor cost. Use deduction when the existing journal cost already includes that labor portion.
When Post Overtime Costs is enabled, the paycode’s Overtime Factor multiplies the selected labor rate. This applies to both the employee and center labor sources. When disabled, the factor is 1. The amount deducted is not multiplied by the overtime factor.
The calculation is: existing journal Unit Cost + ((selected hourly labor rate × labor factor − hourly labor deduction) ÷ capacity units per hour). Shop Floor Insight converts the hourly adjustment to the capacity time unit used by the center.
Adjust Journal Unit Cost
For Shop Floor Employee and Shop Floor Work Center, No Adjustment adds the selected labor cost to the existing journal Unit Cost. Deduct Shop Floor Work Center Direct Labor subtracts the corresponding Shop Floor center’s Labour Portion of Direct Cost before adding the selected labor cost. Use deduction when the existing journal cost already includes that labor portion.
When Post Overtime Costs is enabled, the paycode’s Overtime Factor multiplies the selected labor rate. This applies to both the employee and center labor sources. When disabled, the factor is 1. The amount deducted is not multiplied by the overtime factor.
The calculation is: existing journal Unit Cost + ((selected hourly labor rate × labor factor − hourly labor deduction) ÷ capacity units per hour). Shop Floor Insight converts the hourly adjustment to the capacity time unit used by the center.
This feature is best used when the work centers are configured with hours, and the time is also recorded in hours.
Work Center and Machine Center Employee Records
When the Shop Floor Employee record’s Source Type is Work Center or Machine Center, Shop Floor Insight sets the added labor factor to zero. If deduction is enabled, the Shop Floor center’s labor portion is still subtracted. With the example rates above, No Adjustment leaves the journal Unit Cost at $50 per hour, while deduction reduces it to $35 per hour. The human-employee examples therefore do not apply to these records.
Custom Codeunit
For Custom Codeunit, the returned Custom Labour Cost replaces the existing journal Unit Cost. Adjust Journal Unit Cost does not apply, and the standard calculation does not automatically multiply the custom cost by the paycode’s overtime factor. If Adjust Overhead for Labor is enabled, the existing Overhead Rate is added to the custom cost. If Adjust Indirect for Labor is enabled, the resulting amount is then multiplied by 1 + Indirect Cost % ÷ 100. The customization must supply a cost appropriate to the journal’s posting unit.
Scope and Access
The labor-cost calculation runs for production time card lines that are not marked Adjustment. For Adjustment lines, it runs only when Post Overtime Costs is enabled. A configured Production Post Codeunit or other posting customization can subsequently change the journal values.
These settings control production time costing. Shop Floor Insight collects and classifies time for payroll integration; the payroll system remains responsible for calculating payroll. If employee Direct Unit Cost contains confidential wage information, configure access to employee records and other places where that information is available accordingly.
Client — Config No. Behavior
Always Persist retains a supplied client configuration, supporting scanning stations that should continue using a particular configuration as employees change. Change On Login allows Shop Floor Insight to determine the configuration again during login using the employee context, including applicable employee configuration overrides. If no configuration is supplied, Shop Floor Insight must determine one regardless of this setting.
Client — Global Dispatch Filters
The global dispatch date settings apply to production routing operations and project tasks. With Filter Start Date enabled, the relevant start date must be on or after the date calculated from today and Dispatch Starting Date Filter. With Filter End Date enabled, the relevant end date must be on or before the calculated ending boundary. For example, −3M and 2M create boundaries three months before and two months after today. Both enabled conditions must be satisfied.
The production custom filter applies to Production Order Routing Lines, while the project custom filter applies to Project Tasks. Global filters are combined with applicable client-configuration and screen filters. An entry must satisfy the combined restrictions to appear.
Dispatch Employee Filtering uses the assignment field on the dispatch records. Do Not Filter removes this assignment restriction; Current User uses the employee assignment supplied by the client; Unassigned shows records with no assignment; and Unassigned or Current User includes both. This setting is also used by project-task dispatch filtering. “Current User” refers to the Shop Floor employee context supplied for dispatch, rather than simply the Business Central account hosting the web service session.
Dispatch Row Limit limits returned dispatch rows, which can represent individual operations rather than distinct production orders. The standard production dispatch implementation uses a maximum of 500 rows when the configured value is zero or negative.
Group Cards
Group Scan enables group time card processing. With Allow Group Cards selected, scanning an employee badge while a compatible group card is active adds that employee to the group or clocks off the employee’s existing open membership line.
A group container is a Shop Floor Employee record whose Source Type is Work Center or Machine Center. Group Container Filter further restricts which of those records qualify as containers. Use its filter builder to identify the intended group records. A blank filter adds no further restriction beyond the required source type.
Default Group Activity Code identifies the activity used for lines that record an individual employee’s participation on a group card. It can remain blank when group cards are not used.
Group Time Distribution determines what happens during standard preparation of a group card. Do Nothing performs no distribution. Only Payroll Time totals the group card’s time by paycode and writes that time to the participating employees’ individual cards using their default activities; it does not copy the productive document details to those individual lines. Copy All requires customization: the standard implementation raises an error instead of copying productive time. Select it only when the installation includes the necessary custom implementation.
Client — S2S (Service to Service ) Connection Setup Overrides
This section should not require adjustments for typical Business Central SaaS scenarios, however if you are configuring your own oauth provider and/or are using Business Central on-premise with OAuth then depending on your specific scenario you might need alterations. The support team might also direct you to this group of settings for advanced troubleshooting. If your situation is not those described, then do not adjust any settings in this group.
S2S connection setup overrides apply when using the S2S Connection Setup Tool for service-to-service authentication. Leave the URL overrides blank to use the standard Insight Works hosted setup services. Configure alternate endpoints when directed by Insight Works.
Entra create-application URL (override) identifies an alternate application-creation endpoint. Entra credential-retrieval URL (override) identifies an alternate credential-retrieval endpoint. Enter base URLs without a ?code= access-key parameter. Supply the corresponding keys separately through New create-application access key and New credential-retrieval access key.
After entering an access key and leaving the field, Shop Floor Insight saves the key in company-specific isolated storage and clears the entry box. An empty box therefore does not indicate that no key is stored. Leaving an entry blank retains the existing stored key. Clear stored S2S access keys removes both saved override keys; with blank URL overrides, the standard hosted endpoints and keys apply.
Last Provisioned Entra Client identifies the most recent Microsoft Entra application created by the setup tool. Grant Entra consent opens that application so the required consent can be granted. The action becomes available when a provisioned application ID has been recorded.
Page Actions
Download Service Installer downloads the Shop Floor Insight service installer corresponding to the installed application version.
Upgrade runs Shop Floor Insight’s upgrade-data configuration routine for data from earlier versions. It performs application-specific upgrade processing within Business Central; use it as part of the applicable upgrade procedure.
Still need help?
Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.