Skip to content

Shop Floor Insight · Set up

Configure Lot and Serial Number Requirements for Output in Shop Floor Insight

Last updated October 22, 2026

Shop Floor Insight 7.16 introduces Output Item Tracking Behavior on the Shop Floor Client Configuration card, which controls whether operators can record output without lot or serial numbers, have numbers assigned automatically, or must enter them.

The setting applies to tracked items when recording finished goods output on the last routing operation. The item’s Item Tracking Code determines whether lot numbers, serial numbers, or both are needed.

Before you begin

Use Shop Floor Insight 7.16 or newer. For the Shop Floor web client, also update the Shop Floor Communication App (the windows service) to include the updated output screens. You must update both the app in Business Central as well as the windows service to use this capability.

For output with item tracking, open Shop Floor Setup and set Register Output To to Output Journal.

Choose the tracking behavior

  1. In Business Central, search for Shop Floor Client Configurations.
  2. Select the configuration used by the employee or scanning station
  3. On the Shop Floor Client Configuration Card, expand Production Order and locate Behavior.
  4. Set Output Item Tracking Behavior to the appropriate option:
Option What happens
Allow missing tracking Preserves the previous behavior. Operators receive warnings when tracking is missing but can continue recording output. Required tracking must still be completed before posting in Business Central.
Auto assign tracking Assigns missing lot or serial numbers from the item’s number series when output is registered to the Output Journal.
Tracking required Prevents recording output when a lot or serial number required for the item is missing. The operator must supply the missing information before continuing.
  1. For the Shop Floor web client, reload the browser page using Ctrl+F5 so the configuration change takes effect.

Set up automatic assignment

For each item being produced:

  1. Open the Item Card.
  2. In the Item Tracking section, check that Item Tracking Code is configured for the required tracking.
  3. Set Lot Nos. to the number series used for automatically generated lot numbers.
  4. For serial-tracked items, set Serial Nos. to the number series used for automatically generated serial numbers. Configure both fields if the item uses both types of tracking.

With Auto assign tracking selected, record output normally and choose Register. The actual numbers are assigned when the Output Journal entries are created; they are not displayed in advance in the Output popup.

In the phone interface, the tracking fields are hidden automatically and a message indicates that numbers will be assigned. In the Shop Floor web client, consider hiding the lot and serial columns when operators do not need to enter them.

For automatically generated tracking, each output entry receives a lot number and serialized output receives a separate serial number for each unit. Serialized quantities must be whole numbers.

To review the assigned numbers, open Output Journals, select the configured Output Batch Name, and open Item Tracking Lines for the output entry. Registering output creates journal entries; it does not automatically post them.

Require operators to enter tracking

Select Tracking required when operators must enter or scan the actual lot or serial numbers.

When recording output, enter the required tracking before choosing Register. Missing tracking produces an error identifying what must be supplied. Items that do not require tracking are unaffected.

When using Quality Inspector with Shop Floor Insight

With automatic assignment and inspections embedded in the output screen, an inspection may initially contain a temporary tracking placeholder. When output is registered, the generated lot or serial number replaces the placeholder on the related inspection.

View this article as Markdown

Still need help?

Ask other Business Central users in the Insight Works community, or send the details to the support team. Include the steps you took and any error message you saw.