---
title: "Use Business Central Workflows with Quality Inspector"
app: "Quality Inspector"
section: "Set up"
last_updated: "2026-09-22"
url: "https://insight-works.com/kb/quality-inspector/use-business-central-workflows-with-quality-inspector/"
---

# Use Business Central Workflows with Quality Inspector

Quality Inspector integrates with Microsoft Dynamics 365 Business Central workflows to automate actions when quality inspection tests are created, changed, finished, reopened, approved, rejected, or delegated. Note that most use cases that can be handled with Business Central Workflows can also be handled with Power Automate, Quality Inspector includes web services and external business events designed to work with Power Automate.

Workflows can be used to automate quality-related business processes such as:

- Blocking inventory while it is under inspection.
- Releasing inventory after an acceptable inspection.
- Moving failed material to a QC Hold or quarantine bin.
- Creating retests or NCRs.
- Removing failed inventory with a negative adjustment.
- Changing item tracking information.
- Recording production output or scrap.
- Creating transfer orders or purchase returns.
- Updating related Business Central records.
- Automatically creating PDF inspection reports or Certificates of Analysis.

For examples of workflow configuration, see [Sample Workflows for Quality Inspector: Moving Items, Initiating a Retest, and Discarding Failed Stock](/kb/quality-inspector/sample-workflows-for-quality-inspector-moving-items-initiating-a-retest-and-discarding-failed-stock/).

### Enable Workflow Integration

Before creating Quality Inspector workflows:

1. Search for **Quality Inspector Setup**.
2. Locate the **Workflow and Approval Request Integration** section.
3. Set **Workflow Integration** to enable workflow integration.

If workflow integration is disabled, Quality Inspector workflow events and responses are not added to the Business Central workflow library.

### Quality Inspector Workflow Events

Workflow events define when a workflow starts.

#### A Quality Inspection Test is created

Runs when a new Quality Inspection Test is created.

This event is useful when something must happen immediately when inventory enters the inspection process.

For example, you could:

- Block the lot or serial number so the material cannot be consumed or shipped before inspection.
- Move the material to an inspection or quarantine location.
- Create an internal put-away.
- Set a field on another Business Central record to indicate that the item is under quality review.

#### A Quality Inspection ReTest is created

Runs when a Quality Inspection ReTest is created.

This allows retests to have different workflow behavior from the original inspection.

For example, the original failed test could create a retest, and the retest-created event could:

- Keep the inventory blocked.
- Notify another business process by changing a database field.
- Move the inventory to a different inspection area.

For more information about retests, see [Create a Re-test in Quality Inspector](/kb/quality-inspector/).

#### A Quality Inspection Test has changed

Runs when a Quality Inspection Test changes.

This event is useful when workflow processing needs to occur before the test is finished, such as when a particular field or status changes.

Use this event carefully. A workflow response that changes the Quality Inspection Test can cause the test-changed event to run again. Avoid creating workflows where the event and response continuously trigger one another.

#### A Quality Inspection Test is finished

Runs when a Quality Inspection Test is finished.

This is typically the most useful event for disposition workflows because the test has reached a final inspection result.

For example, a finished test can:

- Unblock an acceptable lot.
- Move failed inventory to quarantine.
- Create a negative adjustment.
- Create a purchase return.
- Record production scrap.
- Create an NCR.
- Create a retest.
- Automatically generate a PDF inspection report.

#### A Quality Inspection Test is reopened

Runs when a finished Quality Inspection Test is reopened.

This can be used where reopening an inspection should place material back under control.

For example, you could:

- Re-block a lot that had previously been released.
- Move inventory back to a QC Hold location.
- Clear or update a related status field in Business Central.

### Approval Workflow Events

Quality Inspector also integrates Quality Inspection Tests with Business Central approval workflows.

The following events are available in supported Quality Inspector editions:

- **Quality Inspection Request is approved**
- **Quality Inspection Request is rejected**
- **Quality Inspection Request is delegated**

These can be used to build formal review and sign-off processes around Quality Inspection Tests.

For example, a finished inspection could require approval by a quality manager before the test is released and the inventory becomes available.

For a complete example, see [Create a Multi-Step Approval Workflow to Finish a Quality Inspection Test](/kb/quality-inspector/create-a-multi-step-approval-workflow-to-finish-a-quality-inspection-test/).

### Workflow Conditions

Business Central workflow conditions can be used to control when a Quality Inspector workflow response runs.

Because Quality Inspector workflow events are associated with the Quality Inspection Test, conditions can be applied to fields on the test.

Examples include:

- Grade Code
- Template Code
- Item No.
- Location Code
- Lot No.
- Serial No.
- Package No.
- Source information
- Assigned User ID

This allows one event to support multiple outcomes.

For example:

**When:** A Quality Inspection Test is finished

**If:** Grade Code = PASS

**Then:** Un-Block Lot in the Test

A second workflow branch could be:

**If:** Grade Code = FAIL

**Then:** Move Inventory from Test

### Quality Inspector Workflow Responses

Workflow responses define what happens after a workflow event and its conditions are satisfied.

### Test and NCR Responses

#### Create a Quality Inspection Test

Creates a Quality Inspection Test for the record associated with the workflow.

This response is useful where a Business Central workflow or another Quality Inspector event determines that another inspection is required.

Possible business uses include:

- Triggering an additional inspection after another quality-related event.
- Creating a separate inspection for another department or inspection process.
- Starting a new inspection based on a condition found during another process.

#### Create an NCR

Creates a Non-Conformance Report from the applicable Quality Inspection Test.

This is useful when a failed inspection requires investigation beyond simply blocking or disposing of the material.

An NCR can be used to document and investigate issues such as:

- Supplier defects.
- Production defects.
- Repeated dimensional failures.
- Material requiring corrective action.
- Product that does not meet specification.

A common workflow is:

**When:** A Quality Inspection Test is finished **Condition:** Grade Code is unacceptable **Then:** Create an NCR

Quality Inspector can also configure an automatic NCR workflow as part of the NCR setup process.

#### Finish the Quality Inspection Test

Finishes the applicable Quality Inspection Test.

This can be used when another workflow event, approval, or business process determines that the inspection should be completed automatically.

One example is an approval workflow where the final approval finishes the Quality Inspection Test.

See [Create a Multi-Step Approval Workflow to Finish a Quality Inspection Test](/kb/quality-inspector/create-a-multi-step-approval-workflow-to-finish-a-quality-inspection-test/).

#### Reopen the Quality Inspection Test

Reopens the applicable Quality Inspection Test.

This can be useful where the test must return to an editable state after another workflow action.

Examples include:

- An approval request is rejected and the inspector must correct the test.
- Additional measurements are required.
- A test was finished prematurely.
- A quality manager requests additional inspection.

#### Create Retest

Creates a retest from the applicable Quality Inspection Test.

This is useful when a failed or inconclusive inspection requires another inspection while preserving the original test.

Typical examples include:

- Rechecking a failed sample.
- Performing a second inspection after rework.
- Running another inspection after equipment recalibration.
- Performing verification testing before releasing quarantined inventory.

See [Create a Re-test in Quality Inspector](/kb/quality-inspector/).

### Lot, Serial, and Package Blocking Responses

Quality Inspector uses Business Central’s item tracking information records for these responses.

The response does not create a separate Quality Inspector-only block. It updates the **Blocked** status associated with the corresponding Business Central item tracking information record.

Microsoft documents that a blocked lot or serial information record is excluded from transactions.

#### Block Lot in the Test

Blocks the lot number associated with the Quality Inspection Test using the Business Central **Lot No. Information Card**.

This is useful when inventory should not be:

- Consumed in production.
- Sold or shipped.
- Transferred.
- Otherwise used while inspection is pending.

A common receiving process is:

1. Receive a lot.
2. Create a Quality Inspection Test.
3. Block the lot.
4. Perform the inspection.
5. Unblock the lot only if the test passes.

For Microsoft’s description of lot information and blocking, see [Track items with serial, lot, and package numbers](https://learn.microsoft.com/en-us/dynamics365/business-central/inventory-how-work-item-tracking).

Quality Inspector also has dedicated documentation for this process. See [Automate Block and Unblock Lot Transactions in Quality Inspector](/kb/quality-inspector/automate-block-and-unblock-lot-transactions-in-quality-inspector/).

#### Un-Block Lot in the Test

Clears the blocked status on the Business Central **Lot No. Information Card** associated with the test.

This is typically used after an acceptable inspection.

For example:

**When:** A Quality Inspection Test is finished **Condition:** Grade Code = PASS **Then:** Un-Block Lot in the Test

This provides a simple release process where the lot remains unusable until Quality Inspector determines it has passed inspection.

#### Block Serial in the Test

Blocks the serial number associated with the Quality Inspection Test using the Business Central **Serial No. Information Card**.

This is useful for individually tracked products where one serial number must be prevented from being used even though other units of the same item are acceptable.

Examples include:

- Serialized equipment awaiting final inspection.
- A defective serialized component.
- A returned unit being evaluated.
- A serialized finished good awaiting quality release.

For Microsoft’s documentation of serial information cards and the **Blocked** field, see [Track items with serial, lot, and package numbers](https://learn.microsoft.com/en-us/dynamics365/business-central/inventory-how-work-item-tracking).

#### Un-Block Serial in the Test

Clears the blocked status on the Business Central **Serial No. Information Card** associated with the test.

This can be used to release a serialized unit after:

- Successful inspection.
- Rework and retest.
- Quality approval.

#### Block Package in the Test

Blocks the package number associated with the Quality Inspection Test using Business Central’s **Package No. Information** record.

This response is useful when package tracking is used to group or identify inventory and the complete package should remain unavailable while it is under quality review.

Examples include:

- A pallet or package awaiting receiving inspection.
- A package containing material that failed inspection.
- A package temporarily held pending documentation or COA review.

Business Central includes a **Package No. Information Card** for package information.

See [Package No. Information Card – Microsoft Learn](https://learn.microsoft.com/en-us/dynamics365/business-central/application/base-application/page/microsoft.inventory.tracking.package-no.-information-card).

#### Un-Block Package in the Test

Removes the blocked state from the package associated with the Quality Inspection Test.

This can be used to release an entire tracked package after inspection is successfully completed.

Package blocking responses require a Business Central version that supports package tracking.

### Inventory Movement and Warehouse Responses

#### Move Inventory from Test

Moves inventory associated with the Quality Inspection Test according to the workflow response configuration.

The response supports source and destination settings and can be used to automate physical segregation of inspected material.

Typical business processes include:

- Moving failed inventory from receiving to a **QC HOLD** bin.
- Moving accepted inventory from an inspection bin to available inventory.
- Moving rejected material to a scrap or MRB area.
- Moving material to a separate quarantine location.

For example:

**When:** A Quality Inspection Test is finished **Condition:** Grade Code = FAIL **Then:** Move Inventory from Test **Destination:** QC-HOLD

This lets the inspection result control where the inventory is physically stored.

See [Move Product Automatically from One Bin to Another Bin in Quality Inspector](/kb/quality-inspector/move-product-automatically-from-one-bin-to-another-bin-in-quality-inspector/).

#### Create an Internal Put-away

Creates a Business Central internal put-away using the information associated with the Quality Inspection Test and the configured workflow options.

This can be useful in advanced warehouse environments where the quality decision should result in warehouse-directed activity rather than directly reclassifying the inventory.

For example:

- Failed inventory needs to be put away into a quarantine bin.
- Accepted inventory needs to be directed from an inspection area into normal storage.
- Quality personnel make the disposition decision, while warehouse personnel perform the physical put-away.

#### Create Transfer Order

Creates a transfer order as a disposition for the Quality Inspection Test.

This is useful when the inventory must move between Business Central locations rather than only between bins.

Examples include:

- Moving rejected material to a separate quarantine location.
- Moving inventory to a central quality laboratory.
- Sending material to another facility for rework or review.
- Moving failed material out of a directed warehouse environment into a non-warehouse location.

See [Create a Transfer Order to Move Material from a Directed Pick Environment to a Non-Warehouse Location in Quality Inspector](/kb/quality-inspector/create-a-transfer-order-to-move-material-from-a-directed-pick-environment-to-a-non-warehouse-location-in-quality-inspector/).

### License Plate Responses

Where the applicable Insight Works License Plate functionality is installed, Quality Inspector includes responses for controlling related License Plates.

#### Quarantine related License Plates

Quarantines License Plates related to the Quality Inspection Test.

This is useful where a License Plate represents a pallet, tote, container, or other group of inventory that should be prevented from normal warehouse use while quality review is in progress.

Examples include:

- Quarantining an entire pallet when one inspection applies to the pallet.
- Preventing warehouse users from selecting the License Plate while the material is on hold.
- Holding received material until a COA or inspection is approved.

#### Un-Quarantine related License Plates

Removes the quarantine status from License Plates associated with the Quality Inspection Test.

This is typically used after the quality inspection passes or after an authorized approval releases the inventory.

#### Move License Plate from Test

Moves the License Plate associated with the Quality Inspection Test using the configured workflow disposition settings.

This can be used where material is managed operationally by License Plate rather than moving individual item tracking entries.

For example:

- Move a failed pallet to QC HOLD.
- Move an accepted pallet from inspection to available inventory.
- Move a quarantined License Plate to an MRB or rework area.

### Inventory Adjustment Response

#### Create a Negative Adjustment

Creates a negative inventory adjustment based on the Quality Inspection Test and its configured disposition options.

This is useful when failed material should be removed from available inventory rather than physically moved elsewhere.

Examples include:

- Destructive testing consumed the sample.
- Product failed inspection and must be discarded.
- Material was damaged during inspection.
- Scrap should be removed from inventory without creating a return.

For example:

**When:** A Quality Inspection Test is finished **Condition:** Grade Code = SCRAP **Then:** Create a Negative Adjustment

This can automate the inventory reduction as part of the inspection disposition.

### Item Tracking Response

#### Change Item Tracking Information

Changes item tracking information associated with the Quality Inspection Test.

The workflow response supports replacement values for applicable item tracking information, including:

- Lot No.
- Serial No.
- Package No.
- Expiration Date.

This can be useful where quality inspection determines that tracking information needs to change.

Examples include:

- Assigning a new lot number after rework.
- Changing an expiration date based on quality review.
- Re-identifying inventory after inspection.
- Separating failed inventory into a different tracking number.

Changes to item tracking information should be designed carefully because item tracking is part of Business Central inventory traceability.

### Production Responses

#### Record Production Output

Records production output using the production information associated with the Quality Inspection Test.

This can be useful when a quality decision determines how much production should be recorded as acceptable output.

Examples include:

- A final inspection determines the quantity accepted as finished output.
- Quality personnel release the accepted quantity after inspection.
- A workflow records output only after required testing has been completed.

#### Record Production Scrap

Records production scrap using the production information associated with the Quality Inspection Test.

A Scrap Code can be configured on the response.

This is useful when failed inspection quantities should be reflected directly in production reporting.

Examples include:

- An in-process inspection identifies defective units.
- Final inspection determines that part of production must be scrapped.
- Quality rejection should update the production order rather than only adjusting finished inventory.

### Purchasing Response

#### Create Purchase Return

Creates a purchase return from the Quality Inspection Test.

This is useful for incoming inspection failures where defective material must be returned to the vendor.

A typical process is:

1. Receive purchased material.
2. Create and complete the Quality Inspection Test.
3. Identify the material as unacceptable.
4. Create a purchase return from the workflow.
5. Process the return through the normal Business Central purchasing process.

This provides traceability between the quality decision and the resulting vendor return.

See [Create a Purchase Return Order from a Test in Quality Inspector](/kb/quality-inspector/create-a-purchase-return-order-from-a-test-in-quality-inspector/).

### Database Response

#### Set Database Value

Updates a field on another Business Central record.

The workflow response allows you to configure:

- The table to update.
- The filter used to find the record.
- The field to update.
- The value to set.

Expressions can also use information from the Quality Inspection Test.

This is one of the most flexible workflow responses because it allows a quality result to affect other Business Central master or transactional data.

Examples include:

- Block purchasing for an item after a serious quality failure.
- Block a vendor after a failed supplier inspection.
- Set a Production BOM to **Under Development**.
- Set a custom QC status field.
- Flag an item for engineering review.
- Update a custom field used by another extension.

For detailed configuration examples, see [Set a Database Value in a Workflow Response](/kb/quality-inspector/set-a-database-value-in-a-workflow-response/).

### Attachment Response

#### Create attachment

Creates a PDF report and attaches it to the Quality Inspection Test.

This is useful when completed inspections should automatically generate permanent documentation without requiring the inspector to manually create the PDF.

Examples include:

- Creating a Certificate of Analysis when an inspection passes.
- Attaching an inspection report when a final test is completed.
- Creating a PDF record for customer or regulatory documentation.
- Preserving a report snapshot at the time the test is finished.

The report to create is selected in the workflow response options.

For setup instructions, see [Create PDF Attachments Automatically When a Test Finishes in Quality Inspector](/kb/quality-inspector/create-pdf-attachments-automatically-when-a-test-finishes/).

This response requires a supported full version of Quality Inspector and Business Central 26 or newer.

## Workflow Examples

### Block a Lot Until Inspection is Complete

Use a workflow to prevent a received lot from being used before inspection.

**Workflow 1**

1. **When Event:** A Quality Inspection Test is created.
2. **Response:** Block Lot in the Test.

**Workflow 2**

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** Grade Code = PASS.
3. **Response:** Un-Block Lot in the Test.

The Business Central Lot No. Information Card remains blocked until the inspection passes.

### Keep Failed Lots Blocked

Instead of automatically unblocking every finished inspection, only unblock acceptable grades.

For example:

**PASS**

- Un-Block Lot in the Test.
- Move Inventory from Test to an available bin.

**FAIL**

- Leave the lot blocked.
- Move Inventory from Test to QC HOLD.
- Create an NCR.

This keeps the failed lot unavailable while also recording the quality disposition.

### Move Failed Inventory to a Quarantine Bin

Create a workflow with:

1. **When Event:** A Quality Inspection Test is finished.
2. Add a condition for an unacceptable Grade Code.
3. **Response:** Move Inventory from Test.
4. Configure the destination location and bin as the QC Hold or quarantine area.

The inventory is physically segregated based on the inspection result.

### Release Accepted Inventory from Inspection

A corresponding passing workflow can move material out of the inspection area.

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** Grade Code = PASS.
3. **Response:** Move Inventory from Test.
4. Set the destination to the normal storage or available inventory bin.

This can be combined with **Un-Block Lot in the Test**.

### Automatically Create an NCR for Failed Tests

Create a workflow with:

1. **When Event:** A Quality Inspection Test is finished.
2. Add a condition for an unacceptable Grade Code.
3. **Response:** Create an NCR.

This is useful where every failed final inspection requires formal non-conformance investigation.

### Automatically Create a Retest

Create a workflow with:

1. **When Event:** A Quality Inspection Test is finished.
2. Configure the conditions that identify when another inspection is required.
3. **Response:** Create Retest.

This can be used after:

- Rework.
- An inconclusive result.
- A failed first inspection.
- An inspection requiring independent verification.

### Scrap Failed Production

For production inspections, a workflow can convert a failed quality result into production scrap.

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** Grade Code = SCRAP.
3. **Response:** Record Production Scrap.
4. Configure the applicable Scrap Code.

This ties the quality disposition directly to production reporting.

### Create a Negative Adjustment for Destructive Testing

Some inspections destroy the material being tested.

For example:

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** The applicable test or template represents destructive inspection.
3. **Response:** Create a Negative Adjustment.

This removes the consumed sample quantity from inventory.

### Return Failed Purchased Material to the Vendor

Create a workflow with:

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** Grade Code = FAIL.
3. **Response:** Create Purchase Return.

This supports an incoming inspection process where failed purchased material should be returned rather than used or scrapped internally.

See [Create a Purchase Return Order from a Test in Quality Inspector](/kb/quality-inspector/create-a-purchase-return-order-from-a-test-in-quality-inspector/).

### Transfer Failed Inventory to a Separate QC Location

Where QC Hold inventory is maintained in a separate Business Central location:

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** Grade Code = FAIL.
3. **Response:** Create Transfer Order.
4. Configure the quarantine destination location.

The normal Business Central transfer process can then be used to move the material.

### Require Quality Approval Before Releasing Inventory

Business Central approval workflows can be combined with the Quality Inspector workflow events.

For example:

1. Finish the Quality Inspection Test.
2. Send the test for approval.
3. Require one or more quality managers to approve it.
4. After approval, finish or release the inspection.
5. Unblock the related lot or move inventory out of QC Hold.

See [Create a Multi-Step Approval Workflow to Finish a Quality Inspection Test](/kb/quality-inspector/create-a-multi-step-approval-workflow-to-finish-a-quality-inspection-test/).

### Automatically Create a Certificate of Analysis PDF

A completed test can automatically create its report attachment.

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** Optionally limit the workflow to the required template, item, grade, or other field.
3. **Response:** Create attachment.
4. Select the Certificate of Analysis or other inspection report.

See [Create PDF Attachments Automatically When a Test Finishes in Quality Inspector](/kb/quality-inspector/create-pdf-attachments-automatically-when-a-test-finishes/).

### Block a Vendor After a Serious Incoming Inspection Failure

The **Set Database Value** response can update another Business Central record.

For example:

1. **When Event:** A Quality Inspection Test is finished.
2. **Condition:** The result meets the organization’s criteria for blocking the vendor.
3. **Response:** Set Database Value.
4. Set the Vendor record’s applicable blocked field.

This can be used where a serious supplier quality event requires purchasing controls.

See [Set a Database Value in a Workflow Response](/kb/quality-inspector/set-a-database-value-in-a-workflow-response/).

### Put a Production BOM Back Under Development

A failed inspection may indicate that the manufacturing definition requires review.

Using **Set Database Value**, a workflow can update the related Production BOM status.

This type of workflow can be useful where a failed first article or engineering inspection should prevent continued use of the existing manufacturing definition until it has been reviewed.

## Response Availability

Available responses can depend on:

- The installed Quality Inspector edition.
- The Business Central version.
- Other installed Insight Works applications.

For example:

- Approval-related events are edition-dependent in the source.
- License Plate quarantine responses require the applicable Insight Works functionality.
- Package blocking requires a Business Central version with package tracking support.
- **Create attachment** requires the supported full version of Quality Inspector and Business Central 26 or newer.

Only workflow events and responses displayed in the Business Central workflow editor for the installed environment should be selected.

## References

- [Quality Inspector](/kb/quality-inspector/quality-inspector/)
- [Sample Workflows for Quality Inspector: Moving Items, Initiating a Retest, and Discarding Failed Stock](/kb/quality-inspector/sample-workflows-for-quality-inspector-moving-items-initiating-a-retest-and-discarding-failed-stock/)
- [Set a Database Value in a Workflow Response](/kb/quality-inspector/set-a-database-value-in-a-workflow-response/)
- [Create a Multi-Step Approval Workflow to Finish a Quality Inspection Test](/kb/quality-inspector/create-a-multi-step-approval-workflow-to-finish-a-quality-inspection-test/)
- [Create PDF Attachments Automatically When a Test Finishes in Quality Inspector](/kb/quality-inspector/create-pdf-attachments-automatically-when-a-test-finishes/)
- [Create a Re-test in Quality Inspector](/kb/quality-inspector/)
- [Move Product Automatically from One Bin to Another Bin in Quality Inspector](/kb/quality-inspector/move-product-automatically-from-one-bin-to-another-bin-in-quality-inspector/)
- [Automate Block and Unblock Lot Transactions in Quality Inspector](/kb/quality-inspector/automate-block-and-unblock-lot-transactions-in-quality-inspector/)
- [Create a Purchase Return Order from a Test in Quality Inspector](/kb/quality-inspector/create-a-purchase-return-order-from-a-test-in-quality-inspector/)
- [Create a Transfer Order to Move Material from a Directed Pick Environment to a Non-Warehouse Location in Quality Inspector](/kb/quality-inspector/create-a-transfer-order-to-move-material-from-a-directed-pick-environment-to-a-non-warehouse-location-in-quality-inspector/)
- [Track items with serial, lot, and package numbers – Microsoft Learn](https://learn.microsoft.com/en-us/dynamics365/business-central/inventory-how-work-item-tracking)
- [Package No. Information Card – Microsoft Learn](https://learn.microsoft.com/en-us/dynamics365/business-central/application/base-application/page/microsoft.inventory.tracking.package-no.-information-card)
- [Microsoft Quality Management workflows](https://learn.microsoft.com/en-us/dynamics365/business-central/qms-quality-workflows)
