---
title: "Quick Guide to Sampling and Skip-Lot in Quality Inspector"
app: "Quality Inspector"
section: "Set up"
last_updated: "2026-10-19"
url: "https://insight-works.com/kb/quality-inspector/quick-guide-to-sampling-and-skip-lot-in-quality-inspector/"
---

# Quick Guide to Sampling and Skip-Lot in Quality Inspector

Quality Inspector supports sampling within an inspection and skip-lot rules that control how often inspections occur. This guide gives resellers the essentials and links to configuration examples.

**Sampling** determines how many units to inspect: a fixed quantity, a percentage, or an AQL-based sample. **AQL (Acceptance Quality Limit)** uses the lot quantity, inspection level, and configured sampling plan to determine the sample size and acceptance/rejection limits. **Skip-lot** determines which receipt or production occurrences require inspection, such as testing one receipt and skipping the next four. Sampling and skip-lot can be combined: skip-lot decides **when to inspect**, and sampling decides **how much to inspect**.

Skip-Lot can be used with the Inspection Bins feature to conditionally re-direct the destination bin on warehouse put-aways for conditional holds when skip-lot determines that testing is required for a given batch.

## Start Here

- [What Is Skip-Lot Inspection?](/kb/quality-inspector/what-is-skip-lot-inspection/) — A brief introduction to reducing inspection frequency for proven suppliers or stable processes.
- [Sampling and Skip Lot in Quality Inspector](/kb/quality-inspector/sampling-and-skip-lot-in-quality-inspector/) — Explains sampling, skip-lot, and combining the two.
- [Understanding AQL and Inspection Levels](/kb/quality-inspector/understanding-aql-and-inspection-levels-in-quality-inspector/) — Explains sample sizes, inspection levels, and acceptance/rejection limits.
- [Use the Sample Source Feature](/kb/quality-inspector/use-the-sample-source-feature-on-the-quality-inspector-template/) — Configure fixed-quantity, percentage-based, or AQL sampling on an inspection template.

## Configure Skip-Lot

Create a Skip Lot Rule, then connect it to the applicable Quality Inspection Test Generation Rule. The generation rule determines which items, vendors, and processes it applies to; the skip-lot rule determines whether an automatic inspection is created or skipped.

- [Skip Lot Inspections in Quality Inspector](/kb/quality-inspector/skip-lot-inspections-in-quality-inspector/) — General setup, counting and grouping options, rule states, and decision history.
- [Skip-Lot Thresholds](/kb/quality-inspector/skip-lot-thresholds-in-quality-inspector/) — Distinguishes counting created tests from waiting for passing results, and explains failure thresholds.
- [Implement Skip Lot with Receiving](/kb/quality-inspector/implement-skip-lot-with-receiving-in-quality-inspector/) — A receiving walkthrough with example sequences and expected outcomes.
- [Implement a “Test Every X Lots” Scenario](/kb/quality-inspector/implement-a-test-every-x-lots-scenario-with-skip-lot-in-quality-inspector/) — A simple recurring inspection pattern.
- [Configure Different Receiving Inspection Requirements by Item and Vendor](/kb/quality-inspector/configure-different-receiving-inspection-requirements-by-item-and-vendor/) — Apply sampling, full inspection, or skip-lot to specific vendor/item combinations.

**Before configuring:** confirm whether the customer means every receipt occurrence or every unique lot number, whether reduced inspection requires confirmed passing results, and what should happen after a failure. Skip-lot controls automatic test generation; manually created tests do not follow or advance its sequence.

## Use Inspection Bins with Sampling and Skip-Lot

Inspection bins direct inventory requiring inspection to a designated QC bin during warehouse put-away. When combined with skip-lot, receipts selected for inspection can have their sample quantity directed to the inspection bin and the remaining quantity directed to regular storage. When skip-lot skips inspection and no other qualifying test exists, inspection-bin routing does not apply.

Enable **Put Away to Inspection Bin** on the Item Card and configure the inspection bin for the item and location. This feature requires warehouse item tracking and a qualifying Quality Inspection Test created before the put-away.

- [Route Put-aways to Inspection Bins in Quality Inspector](/kb/quality-inspector/route-put-aways-to-inspection-bins-in-quality-inspector/) — Configure inspection bins, understand sample-quantity splitting, and review receiving and production-output requirements.
- [How to Identify Certain Purchased Items as Requiring Inspection](/kb/quality-inspector/how-to-identify-certain-purchased-items-as-requiring-inspection-and-automatically-have-their-warehouse-put-away-direct-them-to-a-qc-inspection-bin/) — Configure selected purchased items for automatic inspection-bin routing.

## Additional Scenarios

- [Collect Multiple Samples](/kb/quality-inspector/collect-multiple-samples-in-quality-inspector/) — Record multiple sample results within an inspection.
- [Quality Inspection Sample Worksheet](/kb/quality-inspector/iwxqisampleeditor-page-al/) — Enter and review sample measurements and pass/fail counts.
- [Sample Bulk Receipts of Untracked Items](/kb/quality-inspector/sample-bulk-receipts-of-untracked-items-in-quality-inspector/) — Sampling when inventory does not use lot or serial tracking.
- [Implementing ANSI Z1.4 C=0 Sampling](/kb/quality-inspector/implementing-ansi-z1-4-c0-sampling-with-quality-inspector/) — Configure sampling where no failed samples are accepted.
- [Implement CFR Section 42 Subpart C](/kb/quality-inspector/implement-cfr-section-42-subpart-c-while-using-quality-inspector/) — A specialized example of staged inspection requirements.
