---
title: "Quality Inspector User Guide"
app: "Quality Inspector"
section: "How-to guides"
last_updated: "2026-10-28"
url: "https://insight-works.com/kb/quality-inspector/quality-inspector-user-guide/"
---

# Quality Inspector User Guide

Quality Inspector from Insight Works for Microsoft Dynamics 365 Business Central helps you create inspections, record measurements and observations, evaluate results, and manage the follow-up actions required by your quality processes.

Use this guide to understand the inspection lifecycle and find instructions for common tasks, including receiving inspections, production checks, sampling, inventory holds, Non-Conformance Reports, and Certificates of Analysis.

## Before you begin

Quality Inspector should be configured with the templates, grades, source configurations, and test generation rules required by your processes. Users also need permissions appropriate to their inspection and Business Central responsibilities.

For configuration guidance, see [Quality Inspector Setup Guide](/kb/quality-inspector/quality-inspector-setup-guide/), and  [Set Up and Configure Quality Inspector](/kb/quality-inspector/set-up-and-configure-quality-inspector/).

Three concepts are useful when working with inspections:

| Concept | Purpose |
| --- | --- |
| Quality Inspection Template | Defines the questions, measurements, checks, and requirements for an inspection. |
| Test Generation Rule | Determines which template applies to a Business Central record and supports the configured creation methods. |
| Quality Inspection Test | The inspection record containing source information, recorded values, and results. |

For an introduction, see [Understand Quality Inspection Templates and Test Generation Rules](/kb/quality-inspector/understand-quality-inspection-templates-and-test-generation-rules/).

## Work with Quality Inspection Tests

A typical inspection process involves creating or locating the test, recording results, finishing the inspection, and completing any required follow-up.

### Create an inspection manually

Use manual creation when an inspection is needed on demand.

1. Open **Quality Inspection Tests**.
2. Select **Create Test**.
3. Select the template.
4. Select the source where more than one source is available.
5. Choose the record to inspect and any additional item-tracking filters.
6. Select **OK**.

The template and generation rule must already be configured.

You can also create tests from supported source records. For example, for purchase orders, open a purchase order, select the line and from the line actions choose **Create Test,**or if the item is lot or serial tracked then from the item tracking lines create a test. Quality Inspector evaluates the applicable rules and uses the matching template.

Related articles:

- [Use Quality Inspection Tests](/kb/quality-inspector/iwxqitest-page-al/)
- [Create Ad Hoc Quality Tests in Quality Inspector](/kb/quality-inspector/create-ad-hoc-quality-tests-in-quality-inspector/)
- [Create an Ad Hoc Quality Inspection Test for an Item Already in Stock](/kb/quality-inspector/create-an-ad-hoc-quality-inspection-test-for-an-item-already-in-stock/)

### Work with automatically created inspections

Depending on your configuration, tests can be created during receiving, production output, assembly output, warehouse movements, or scheduled processing.

Perform the normal Business Central transaction, then locate the resulting inspection using your inspection list or assigned-work process. A test can be created without opening immediately; the **Show Test** setting controls whether newly created tests are displayed.

Existing-test settings can also cause an earlier inspection to be reused or a retest to be created. If you expect a new test, review the related inspections before creating another manually.

Related articles:

- [Quality Inspector Setup](/kb/quality-inspector/iwxqisetup-page-al/)
- [Select Create Test Behavior and Find Existing Behavior in Quality Inspector](/kb/quality-inspector/select-create-test-behavior-and-find-existing-behavior-in-quality-inspector/)

### Locate and review your inspection

Open the appropriate Quality Inspection Test and confirm its source document, item, tracking information, and quantity before recording results.

Review the assigned inspector and planned work as applicable to your process.

Related article:

- [Assign and Review Tests in Quality Inspector](/kb/quality-inspector/assign-and-review-tests-in-quality-inspector/)

### Record measurements and observations

Enter the actual result in each applicable **Test Value** field. The field type determines whether you enter a measurement, select a choice, record text, or provide another supported value.

Quality Inspector evaluates recorded values using the configured grade conditions. Allowable values determine what can be entered; passing conditions determine whether the result meets the specification.

Where required by the inspection:

- Record the individual sample measurements.
- Identify the measurement tools used.
- Add a measurement note to explain a result or observation.
- Attach supporting documents or pictures.
- Complete the configured signature fields.

Measurement notes are entered against individual test lines. Access to view or edit them depends on inspector permissions.

Related articles:

- [Quality Inspection Test Values](/kb/quality-inspector/iwxqitestvalues-page-al/)
- [Use Measurement Notes and Comments in Quality Inspector](/kb/quality-inspector/use-measurement-notes-and-comments-in-quality-inspector/)
- [Use Tools in Quality Inspector](/kb/quality-inspector/use-tools-in-quality-inspector/)
- [Take and Attach a Picture to a Quality Inspection Test](/kb/quality-inspector/take-and-attach-a-picture-to-a-quality-inspection-test/)
- [Use Basic Signatures in Quality Inspector](/kb/quality-inspector/use-basic-signatures-in-quality-inspector/)

### Review and finish the inspection

Review the recorded values and resulting grade. **Grade Code** identifies the inspection result; **Status** identifies whether the test is open or finished.

To finish an open test, select it on **Quality Inspection Tests**, choose **Finish**, and confirm.

If your process requires approval before finishing, complete the configured approval process.

Related articles:

- [Use Quality Inspection Tests](/kb/quality-inspector/iwxqitest-page-al/)
- [Create a Multi-Step Approval Workflow to Finish a Quality Inspection Test](/kb/quality-inspector/create-a-multi-step-approval-workflow-to-finish-a-quality-inspection-test/)

### Handle failed inspections and partially accepted quantities

Follow your organization’s disposition process when material does not meet requirements. Depending on configuration, this can involve holding inventory, moving it to quarantine, creating a purchase return, making an inventory adjustment, or creating an NCR.

When only part of the inspected quantity is rejected, use the applicable passed or failed quantity for the disposition.

For example, if 950 of 1,000 pieces are accepted, the rejected 50 pieces can be moved or returned separately. A retest is appropriate if those pieces are subsequently reworked and inspected again.

Related articles:

- [Handle Partial Acceptance and Rejected Quantities in Quality Inspector](/kb/quality-inspector/handle-partial-acceptance-and-rejected-quantities-in-quality-inspector/)
- [Perform Inventory Movement in Quality Inspector](/kb/quality-inspector/perform-inventory-movement-in-quality-inspector/)
- [Create a Purchase Return Order from a Test in Quality Inspector](/kb/quality-inspector/create-a-purchase-return-order-from-a-test-in-quality-inspector/)
- [Non-Conformance Reports (NCRs) in Quality Inspector 7.26](/kb/quality-inspector/non-conformance-reports-ncrs-in-quality-inspector-7-26/)

### Create a retest

For another inspection, select the existing test on **Quality Inspection Tests**, choose **Create Retest**, and confirm.

A retest starts open so the follow-up inspection can be performed. Use it for subsequent testing, such as verification after rework or corrective action.

Related articles:

- [Use Quality Inspection Tests](/kb/quality-inspector/iwxqitest-page-al/)
- [Handle Partial Acceptance and Rejected Quantities in Quality Inspector](/kb/quality-inspector/handle-partial-acceptance-and-rejected-quantities-in-quality-inspector/)

### Produce inspection documentation

Use the reporting and attachment features required by your process to retain inspection records and provide supporting documentation.

Quality Inspector supports inspection reporting, Certificates of Analysis, NCR reporting, and PDF attachments. Configured workflows can create report attachments when tests finish.

Related articles:

- [Use Attach as PDF to Automatically Create a PDF of a Certificate of Analysis and Other Quality Inspection Reports](/kb/quality-inspector/use-attach-as-pdf-to-automatically-create-a-pdf-of-a-certificate-of-analysis-and-other-quality-inspection-reports/)
- [Create PDF Attachments Automatically When a Test Finishes in Quality Inspector](/kb/quality-inspector/create-pdf-attachments-automatically-when-a-test-finishes/)

## Documentation by use case

The following sections group existing articles by common tasks. Some articles appear in more than one group because they support multiple processes.

### Receiving and incoming material

Use these articles to inspect purchased material, review supplier documentation, and manage incoming inventory that requires quality review.

- [Create Quality Inspections for Receipts](/kb/quality-inspector/create-quality-inspections-for-receipts/)
- [Create a Purchase Order Test](/kb/quality-inspector/create-a-purchase-order-test/)
- [Manage COA-Required Purchase Receipts with Quality Inspector](/kb/quality-inspector/manage-coa-required-purchase-receipts-with-quality-inspector/)
- [Create a Purchase Return Order from a Test in Quality Inspector](/kb/quality-inspector/create-a-purchase-return-order-from-a-test-in-quality-inspector/)

### Production and assembly inspections

Use these articles for production-output inspections, production validation, and assembly checks.

- [Create a Test Automatically on Production Output in Quality Inspector](/kb/quality-inspector/create-a-test-automatically-on-production-output-in-quality-inspector/)
- [Validate Production](/kb/quality-inspector/validate-production/)
- [Create a Test Automatically with Assembly Output in Quality Inspector](/kb/quality-inspector/create-a-test-automatically-with-assembly-output-in-quality-inspector/)
- [Available User Interfaces for Recording Quality Inspections](/kb/quality-inspector/available-user-interfaces-for-recording-quality-inspections/)

### Warehouse inspections and inventory already in stock

Use these articles when inspecting stored inventory or working with quality processes connected to put-aways and warehouse movements.

- [Create an Ad Hoc Quality Inspection Test for an Item Already in Stock](/kb/quality-inspector/create-an-ad-hoc-quality-inspection-test-for-an-item-already-in-stock/)
- [Create a Test Automatically with a Put-Away or Movement into a Bin in Quality Inspector](/kb/quality-inspector/create-a-test-automatically-with-a-put-away-or-movement-into-a-bin-in-quality-inspector/)
- [Route Put-aways to Inspection Bins in Quality Inspector for QC Hold Locations](/kb/quality-inspector/route-put-aways-to-inspection-bins-in-quality-inspector/)
- [Perform Inventory Movement in Quality Inspector](/kb/quality-inspector/perform-inventory-movement-in-quality-inspector/)

### Sampling, AQL, and Skip-Lot inspections

Sampling determines how much to inspect. Skip-Lot controls which receipt or production occurrences require automatic inspection.

Use the configured sampling requirements when recording results.

- [Quick Guide to Sampling and Skip-Lot in Quality Inspector](/kb/quality-inspector/quick-guide-to-sampling-and-skip-lot-in-quality-inspector/)
- [Collect Multiple Samples in Quality Inspector](/kb/quality-inspector/collect-multiple-samples-in-quality-inspector/)

### Quality holds, release, and rejected material

Use these articles when inspection results control inventory availability or determine how accepted and rejected material is handled.

- [Automate Block and Unblock Lot Transactions in Quality Inspector](/kb/quality-inspector/automate-block-and-unblock-lot-transactions-in-quality-inspector/)
- [How to Place Part of a Lot On Hold in Quality Inspector](/kb/quality-inspector/how-to-place-part-of-a-lot-on-hold-in-quality-inspector/)
- [Handle Partial Acceptance and Rejected Quantities in Quality Inspector](/kb/quality-inspector/handle-partial-acceptance-and-rejected-quantities-in-quality-inspector/)
- [Create a Purchase Return Order from a Test in Quality Inspector](/kb/quality-inspector/create-a-purchase-return-order-from-a-test-in-quality-inspector/)
- [Use Business Central Workflows with Quality Inspector](/kb/quality-inspector/use-business-central-workflows-with-quality-inspector/)

### Non-conformance management and failure investigation

Use NCRs to document and manage quality issues requiring investigation or follow-up. Use Failure Analysis to explore patterns among failed inspections.

- [Non-Conformance Reports (NCRs) in Quality Inspector 7.26](/kb/quality-inspector/non-conformance-reports-ncrs-in-quality-inspector-7-26/)
- [Using the Quality Inspector Failure Analysis Tool](/kb/quality-inspector/using-the-quality-inspector-failure-analysis-tool/)
- [Use Business Central Workflows with Quality Inspector](/kb/quality-inspector/use-business-central-workflows-with-quality-inspector/)

### Customer specifications and Certificates of Analysis

A lot can pass an internal inspection and still fall outside a customer’s requirements. Use customer qualification to review suitable inventory, and customer CoAs where a separate customer-specific inspection record is required.

- [How to Find Lots That Meet a Customer’s Quality Specifications in Quality Inspector](/kb/quality-inspector/how-to-find-lots-that-meet-a-customers-quality-specifications-in-quality-inspector/)
- [Create Customer-Specific Certificates of Analysis in Quality Inspector](/kb/quality-inspector/create-customer-specific-certificates-of-analysis-in-quality-inspector/)
- [Use Attach as PDF to Automatically Create a PDF of a Certificate of Analysis and Other Quality Inspection Reports](/kb/quality-inspector/use-attach-as-pdf-to-automatically-create-a-pdf-of-a-certificate-of-analysis-and-other-quality-inspection-reports/)

### Notes, pictures, tools, and sign-off

Use these articles to capture the supporting evidence and approvals required by an inspection.

- [Use Measurement Notes and Comments in Quality Inspector](/kb/quality-inspector/use-measurement-notes-and-comments-in-quality-inspector/)
- [Take and Attach a Picture to a Quality Inspection Test](/kb/quality-inspector/take-and-attach-a-picture-to-a-quality-inspection-test/)
- [Add Attachments to Inspection Test Plans and Quality Inspection Tests in Quality Inspector](/kb/quality-inspector/add-attachments-to-test-plans-and-tests-in-quality-inspector/)
- [Use Tools in Quality Inspector](/kb/quality-inspector/use-tools-in-quality-inspector/)
- [Use Basic Signatures in Quality Inspector](/kb/quality-inspector/use-basic-signatures-in-quality-inspector/)
- [Create a Multi-Step Approval Workflow to Finish a Quality Inspection Test](/kb/quality-inspector/create-a-multi-step-approval-workflow-to-finish-a-quality-inspection-test/)

### Periodic inspections and mobile data entry

Use these articles for recurring inspections and for recording results through the interface appropriate to the work area.

- [Schedule Automated Tests with Quality Inspector](/kb/quality-inspector/schedule-tests-automatically-with-quality-inspector/)
- [Available User Interfaces for Recording Quality Inspections](/kb/quality-inspector/available-user-interfaces-for-recording-quality-inspections/)
- [How to Record Quality Inspection Tests on a Tablet, Phone, or Other Mobile Device](/kb/quality-inspector/how-to-record-quality-inspection-tests-on-a-tablet-phone-or-other-mobile-device/)
- [How to Scan Paper Quality Inspection Forms into Quality Inspector](/kb/quality-inspector/how-to-scan-paper-quality-inspection-forms-into-quality-inspector/)

### Reviewing inspection history and results

Use these references to review inspection records, individual measurements, and failure patterns.

- [Use Quality Inspection Tests](/kb/quality-inspector/iwxqitest-page-al/)
- [Quality Inspection Test Values](/kb/quality-inspector/iwxqitestvalues-page-al/)
- [Assign and Review Tests in Quality Inspector](/kb/quality-inspector/assign-and-review-tests-in-quality-inspector/)
- [Using the Quality Inspector Failure Analysis Tool](/kb/quality-inspector/using-the-quality-inspector-failure-analysis-tool/)

## Related information

For the complete documentation organized by business process, see [Getting Started With Quality Inspector](/kb/quality-inspector/quality-inspector/).

For configuration and version information, see [Quality Inspector Setup Guide](/kb/quality-inspector/quality-inspector-setup-guide/),  [Set Up and Configure Quality Inspector](/kb/quality-inspector/set-up-and-configure-quality-inspector/) and [Release Notes: Quality Inspector](/kb/quality-inspector/release-notes-quality-inspector/).
