---
title: "Move Product Automatically from One Bin to Another Bin in Quality Inspector"
app: "Quality Inspector"
section: "How-to guides"
last_updated: "2026-06-12"
url: "https://insight-works.com/kb/quality-inspector/move-product-automatically-from-one-bin-to-another-bin-in-quality-inspector/"
---

# Move Product Automatically from One Bin to Another Bin in Quality Inspector

This article describes how to automatically move inventory after a quality inspection has occurred.

Moving product from one bin to another within the same Business Central location can be a way for you to quickly move product to quarantine locations. You can use this strategy to help move product into testing areas based on other triggers. You can change bins for quarantining an item either while a test is being executed (receive items, put into a quarantine location, then move out of quarantine once passed), or after the test fails (receive items, put in warehouse, test a sample, move the entire lot if the sample fails). The strategy depends if you are testing 100% of the units or sampling (often process and industry specific). This is a variation of location movements.

Note: Multiple inventory movement options are available within Quality Inspector, the most common are:

- Item Reclassification Journal (for non-warehouse locations)
- Warehouse Reclassification Journal (for warehouse locations)
- Movement worksheet (another option for warehouse locations)
- Transfer orders

 Note: This walkthrough uses the standard Contoso data available in a demo Business Central 25 install.

### Prerequisite

- Use a W1-ENU-Extended base data with “Contoso” sample demo data as a baseline with the “WHITE” location and the “WRB-1002” item, and vendor “40000”.
- Ensure the Assisted Setup Wizard was run.
- Have a quality inspection test template.
- Have a quality inspection test generation rule.
- Have a Quality Inspection Test for the WRB-1002 item with a known lot; keep the lot unblocked and available to be shipped.
- Ensure all batches are defined on the _Quality Inspection Setup_ page; batches are not set up by default in the wizard.

### Steps

1. Navigate to _Quality Inspection Tests_ in Business Central.
2. Create a test for a DPP location, such as “WHITE” (easiest is to trigger an automatic test based on a put-away), for a lot tracked item.
3. Navigate to _Workflows_.
4. Create a new workflow, and modify the following fields:

   - Code
   - Description
   - Category
5. Select the _When Event_ field in the _Workflow Steps_ section and select “A Quality Inspection Test is Finished”.
6. Select the _On Condition_ field and set to “Always” (opens an edit box to set a filter).
7. Select **+Filter** and set the filter so that “Grade Code” is “FAIL”.
8. Select **OK**.
9. Select the _Then Response_ field and set to “Move Inventory”.
10. Select **OK**.
11. Leave the source location and source bin filters blank in the conditions subpage that opens.
12. Select **Use a Reclassification Journal**.

 Note: In a DPP location, this uses a Warehouse Reclass; in a non-DPP location, this uses the item reclass. The batches are defined on the _Quality Inspection Setup_ page.

1. Select **Entire Lot/Serial/Package** (the most common scenario as it allows moving for both 100% sampling and partial sampling).
2. Leave the _Destination Location_ field as “WHITE”.
3. Select an appropriate bin in the _Destination Bin_ field.
4. Select **Just Create Entries**.

 Note: This is a typical scenario as it is generating a reclassification line as a pick instruction, allowing a warehouse person to execute it. This helps keep the physical product and virtual product lists in sync. Selecting **Post Immediately** could cause the transaction to be automatically moved prior to the real-world event , creating a discrepancy between the physical product list and the virtual product list).

1. Close the screen.
2. Enable the workflow.
3. Close the workflows screen, and located the quality inspection test.
4. Input fail values into the test.
5. Finish the test (your new workflow triggers, and a reclassification journal entry is created).
6. Open the reclassification journal batch (it should be attempting to move the item from the source bin to the destination bin).

[Video: Performing Inventory Movement Using Quality Inspector App for Business Central](https://www.youtube.com/watch?v=3fCBb6g6L7o)

Also refer to:

> [Sample Workflows for Quality Inspector: Moving Items, Initiating a Retest, and Discarding Failed Stock](/kb/quality-inspector/sample-workflows-for-quality-inspector-moving-items-initiating-a-retest-and-discarding-failed-stock/)

[Video: “Sample Workflows for Quality Inspector: Moving Items, Initiating a Retest, and Discarding Failed Stock” — Insight Works Knowledge Base](https://insight-works.com/kb/quality-inspector/sample-workflows-for-quality-inspector-moving-items-initiating-a-retest-and-discarding-failed-stock/embed/#?secret=fJWQfvgd2n#?secret=Ng3F05SaPv)
