---
title: "Quality Inspector Inspection Bins"
app: "Quality Inspector"
section: "How-to guides"
last_updated: "2026-09-18"
url: "https://insight-works.com/kb/quality-inspector/iwxqiinspectionbinlist-page-al/"
---

# Quality Inspector Inspection Bins

## Inspection Bins

Use the **Inspection Bins** page to configure where items should be placed when they require quality inspection, QC hold, quarantine, COA review, or another quality-control process.

Inspection Bin configuration connects an **item and source warehouse location or zone** to the **Quality Control Zone and Quality Control Bin** where that item should be put away for inspection.

This page does not determine whether an item requires inspection and does not define what inspection should be performed. Those requirements are normally configured using Quality Inspection Templates and Quality Inspection Test Generation Rules. The Inspection Bins page defines **where the inventory should go on Warehouse Put-aways when Quality Inspector determines that inspection-bin routing applies**.

For example, you can use Inspection Bins when you want certain purchased items to be identified as requiring inspection and have their Warehouse Put-away direct them to a QC or inspection bin rather than their normal storage bin.

For a complete walkthrough of inspection-bin routing, see [Route Put-aways to Inspection Bins in Quality Inspector for QC Hold Locations](/kb/quality-inspector/route-put-aways-to-inspection-bins-in-quality-inspector/).

### When to Use Inspection Bins

Inspection Bins can be useful for scenarios such as:

- Incoming purchased items that must be inspected before being placed into normal inventory.
- Items that must be placed on **QC Hold** or **Quality Control Hold** when received.
- Items that require a **Certificate of Analysis (COA)** to be reviewed before they are released.
- Lot- or serial-tracked inventory that needs to be physically separated while inspection is pending.
- Warehouse receipts where the resulting Warehouse Put-away should direct inspection inventory to a QC or inspection bin.
- Sampling scenarios where only part of the received quantity is placed into the inspection area.
- Production or other warehouse processes that create put-aways for inventory requiring inspection.
- Processes where a Quality Inspection Test is created when inventory is moved into an inspection or quarantine bin.
- This feature is compatible with Quality Inspectors skip-lot process, and Quality Inspectors sampling features to allow influencing partial quantities into QC zones.

For a COA and QC Hold example, see [Manage COA-Required Purchase Receipts with Quality Inspector](/kb/quality-inspector/manage-coa-required-purchase-receipts-with-quality-inspector/)

### Open the Inspection Bins Page

You can open the page directly by searching for **Inspection Bins** in Business Central.

You can also configure Inspection Bins for a specific item from the **Item Card**:

1. Open the Item Card.
2. Locate the **Quality Inspection** section.
3. If “Put Away To Inspection Bin” is un-checked then check “**Put Away to Inspection Bin”**checked and it will prompt to open the Inspection Bins configuration page.
4. Or, open **Inspection Bins**from the action menu.

When the page is opened from an Item Card, it is filtered to that item. In this case, the **Item No.** does not need to be displayed because the item has already been selected.

You can also select the **Inspection Bin Configuration Count** on the Item Card to review the Inspection Bin configurations that already exist for the item.

### Configure an Inspection Bin

Each line on the Inspection Bins page identifies where a particular item should be directed from a warehouse location or zone.

Enter the following information as appropriate for your warehouse configuration.

#### Item No.

Specifies the item to which the Inspection Bin configuration applies.

Each item can have different Inspection Bin configurations for different locations or source zones.

If you open Inspection Bins from an Item Card, the page is already filtered to that item.

#### Location

Specifies the Business Central location where the item is being handled.

The Quality Control destination is currently within the same Business Central location. Inspection Bin configuration does not route the inventory to a different Business Central location.

For example, an item being received and put away at the `WHITE` location would normally have `WHITE` as its Location.

#### From Zone

Specifies the warehouse zone from which the inventory is being put away.

Use this field when the destination inspection bin depends on the source zone.

For locations using **Directed Put-away and Pick**, the From Zone is required.

This allows the same item to have different inspection-bin configurations depending on where the warehouse activity originates.

#### Quality Control Zone

Specifies the warehouse zone containing the inspection, QC Hold, quarantine, or quality-control area.

For locations using **Directed Put-away and Pick**, a Quality Control Zone is required.

The exact zone code depends on your Business Central warehouse configuration.

#### Quality Control Bin

Specifies the bin where the inventory should be placed for inspection or quality hold.

The bin must belong to the selected Quality Control Zone when a zone is specified.

If the Quality Control Bin is left blank and a Quality Control Zone is configured, Quality Inspector can use a bin from the configured zone where supported by the warehouse-routing process.

At least a **Quality Control Zone** or **Quality Control Bin** must be specified.

### Example

Suppose an organization receives several purchased items at the `WHITE` location.

Most purchased items can be put away normally, but some items require incoming inspection.

For an item requiring inspection, an Inspection Bin configuration might identify:

**Item No.:** The item requiring inspection **Location:** WHITE **From Zone:** The receiving zone **Quality Control Zone:** The warehouse’s QC or inspection zone **Quality Control Bin:** The designated inspection bin

When inspection-bin routing applies, Quality Inspector can alter the generated Warehouse Put-away so the applicable Place line directs the inventory to the configured inspection bin instead of the normal storage destination.

For details, see [Route Put-aways to Inspection Bins in Quality Inspector for QC Hold Locations](/kb/quality-inspector/route-put-aways-to-inspection-bins-in-quality-inspector/).

### Inspection Bins Do Not Identify Which Items Require Inspection

The Inspection Bins page answers:

**Where should this item go when it needs to be placed into inspection?**

It does not, by itself, answer:

**When does this item require an inspection?**

Use **Quality Inspection Test Generation Rules** to determine which transactions or items require a Quality Inspection Test.

For example, you can identify purchased items requiring inspection by:

- A specific Item No.
- Item Category Code
- Other supported item or source-record criteria

If many items use the same incoming inspection process, using an Item Category can avoid maintaining a separate rule for every item.

See:

[Create a Test Generation Rule for a Category of Items in Quality Inspector](/kb/quality-inspector/create-a-test-generation-rule-for-a-category-of-items-in-quality-inspector/)

[Create a Test Generation Rule for a Specific Item in Quality Inspector](/kb/quality-inspector/create-a-test-generation-rule-for-a-specific-item-in-quality-inspector/)

For an introduction to how templates and generation rules work together, see [Understand Quality Inspection Templates and Test Generation Rules](/kb/quality-inspector/understand-quality-inspection-templates-and-test-generation-rules/).

### Using Inspection Bins with Warehouse Receipts and Warehouse Put-aways

A common use of this page is incoming inspection at a Business Central location that uses **Warehouse Receipts** and **Warehouse Put-aways**with **Lot Warehouse**tracked items**.**

A typical process is:

**Purchase Order → Warehouse Receipt → Quality Inspection (when Warehouse Receipt is created, or earlier) → Warehouse Put-away → Inspection Bin**

The Inspection Bin configuration provides the QC destination used when Quality Inspector modifies the Warehouse Put-away.

Depending on whether the inspection covers the entire quantity or only a sample, Quality Inspector can either redirect the full applicable Place quantity or split the put-away so that only the sample quantity is sent to inspection.  This allows using this feature with skip-lot processes and the sampling processes, by having the skip-lot decision to create/not-create a test and the sampling configuration (whether it’s sampling with AQL, sampling with fixed quantities, or sampling with a fixed percentage).

For receiving-related Quality Inspector configuration, see [Create Quality Inspections for Receipts](/kb/quality-inspector/create-quality-inspections-for-receipts/).

### Using Inspection Bins for QC Hold and COA-Required Items

Inspection Bins are also useful when inventory must remain physically separated until quality documentation or inspection results have been reviewed.

For example, an organization may identify particular purchased items as:

- **QC Required**
- **COA Required**
- **QC Hold**
- **Inspection Required**

All these terms mean the same thing to Quality Inspector, when those items are received, the warehouse process can direct them to the configured inspection bin rather than normal storage.

The quality inspector can then review the test, COA, measurements, or other required information before the inventory is released.

See [Manage COA-Required Purchase Receipts with Quality Inspector](/kb/quality-inspector/manage-coa-required-purchase-receipts-with-quality-inspector/) for a more complete example.

### More Than One Location or Zone

An item can have multiple Inspection Bin configuration lines.

For example, the same item may be stocked at multiple warehouse locations, with each location having its own inspection area.

Within a location, you can also configure different Inspection Bin destinations by **From Zone**.

The combination of:

**Item No. + Location + From Zone**

identifies the applicable Inspection Bin configuration.

This lets the inspection destination follow the physical warehouse configuration instead of requiring every location or receiving area to use the same QC bin.

### Deleting Inspection Bin Configuration

If Inspection Bin configurations exist for an item and you disable **Put Away to Inspection Bin** on the Item Card, Quality Inspector can prompt you to remove the item’s existing Inspection Bin configuration.

Deleting an Inspection Bin configuration removes the destination mapping. It does not delete Quality Inspection Tests, Templates, or Test Generation Rules.

### Related Articles

[Route Put-aways to Inspection Bins in Quality Inspector for QC Hold Locations](/kb/quality-inspector/route-put-aways-to-inspection-bins-in-quality-inspector/)

[Manage COA-Required Purchase Receipts with Quality Inspector](/kb/quality-inspector/manage-coa-required-purchase-receipts-with-quality-inspector/)

[Create a Test Generation Rule for a Category of Items in Quality Inspector](/kb/quality-inspector/create-a-test-generation-rule-for-a-category-of-items-in-quality-inspector/)

[Create a Test Generation Rule for a Specific Item in Quality Inspector](/kb/quality-inspector/create-a-test-generation-rule-for-a-specific-item-in-quality-inspector/)

[Understand Quality Inspection Templates and Test Generation Rules](/kb/quality-inspector/understand-quality-inspection-templates-and-test-generation-rules/)

[Create Quality Inspections for Receipts](/kb/quality-inspector/create-quality-inspections-for-receipts/)
