---
title: "Implement a “Test Every ‘X’ Lots” Scenario with Skip-Lot in Quality Inspector"
app: "Quality Inspector"
section: "Set up"
last_updated: "2025-11-20"
url: "https://insight-works.com/kb/quality-inspector/implement-a-test-every-x-lots-scenario-with-skip-lot-in-quality-inspector/"
---

# Implement a “Test Every ‘X’ Lots” Scenario with Skip-Lot in Quality Inspector

Note: The following article is an example scenario of simplified “Test Every X” lots for receiving.

A food manufacturer receives flour from a supplier that has delivered consistently good quality for years.

There is no regulatory requirement in this example for formal skip-lot rules, and incoming flour is already covered by supplier audits and certificates of analysis (COAs).

To reduce workload while still maintaining periodic verification, the QC team wants to setup a simple scenario of only testing every 4 lots that are received.

Because there are only 2 steps the failure is irrelevant in this simplified process, however this might trigger a human to decide to re-test or test other recent lots received.

To implement this in Quality Inspector you would create a skip lot rule configuration with two lines, the first being a test with a create threshold of 1, and the second being a skip with a threshold of 3.

| **Step No.** | **Create Threshold** | **Fail Threshold** | **Action Type** | **Description** | **Pass Threshold** | **Success Step No.** | **Fail Step No.** |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 10 | 1 | 1 | Test | Start with a test |  | 20 | 10 |
| 20 | 3 | 1 | Skip | Skip the next 3 |  | 10 | 10 |
|  |  |  |  |  |  |  |  |

![](/wp-content/uploads/kb-legacy/Implement-a-Test-Every-X-Lots-Scenario-with-Skip-Lot-in-Quality-InspectorImplement-a-Test-Every-X-Lots-Scenario-with-Skip-Lot-in-Quality-Inspector1.png)

This kind of simplified approach is appropriate when:

| **Condition** | **Rationale** |
| --- | --- |
| Supplier is proven & audited | Low risk, stable source |
| No regulatory skip-lot requirement | Freedom to choose simpler logic |
| Testing is routine verification | Purpose is confidence, not gatekeeping |
| Failures are rare | Low need for dynamic sampling changes |

An example walkthrough for a lot tracked item with nine consecutive receipts for a given item would look similar to this:

| Sequence | Rule Code | Grouping Key | Log Type | Test No. | Item No. | Lot No. | Input Source Quantity (base) | Count Quantity | Previous Decision | Previous Counter | Previous Step No. | Resulting Decision | Resulting Counter | Resulting Step No. |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| 1 | TESTEVERY4 | ExampleItem | Create Test | QI00000001 | ExampleItem | LOTTESTEVERY4\_LOT1 | 1 | 1 | Test |  |  | Test | 1 | 10 |
| 2 | TESTEVERY4 | ExampleItem | Skip Test Create |  | ExampleItem | LOTTESTEVERY4\_LOT2 | 1 | 1 | Test | 1 | 10 | Skip | 2 | 20 |
| 3 | TESTEVERY4 | ExampleItem | Skip Test Create |  | ExampleItem | LOTTESTEVERY4\_LOT3 | 1 | 1 | Skip | 1 | 20 | Skip | 2 | 20 |
| 4 | TESTEVERY4 | ExampleItem | Skip Test Create |  | ExampleItem | LOTTESTEVERY4\_LOT4 | 1 | 1 | Skip | 2 | 20 | Skip | 3 | 20 |
| 5 | TESTEVERY4 | ExampleItem | Create Test | QI00000002 | ExampleItem | LOTTESTEVERY4\_LOT5 | 1 | 1 | Skip | 3 | 20 | Test | 4 | 10 |
| 6 | TESTEVERY4 | ExampleItem | Skip Test Create |  | ExampleItem | LOTTESTEVERY4\_LOT6 | 1 | 1 | Test | 1 | 10 | Skip | 2 | 20 |
| 7 | TESTEVERY4 | ExampleItem | Skip Test Create |  | ExampleItem | LOTTESTEVERY4\_LOT7 | 1 | 1 | Skip | 1 | 20 | Skip | 2 | 20 |
| 8 | TESTEVERY4 | ExampleItem | Skip Test Create |  | ExampleItem | LOTTESTEVERY4\_LOT8 | 1 | 1 | Skip | 2 | 20 | Skip | 3 | 20 |
| 9 | TESTEVERY4 | ExampleItem | Create Test | QI00000003 | ExampleItem | LOTTESTEVERY4\_LOT9 | 1 | 1 | Skip | 3 | 20 | Test | 4 | 10 |
