---
title: "Add Attachments to Inspection Test Plans and Quality Inspection Tests in Quality Inspector"
app: "Quality Inspector"
section: "How-to guides"
last_updated: "2026-10-28"
url: "https://insight-works.com/kb/quality-inspector/add-attachments-to-test-plans-and-tests-in-quality-inspector/"
---

# Add Attachments to Inspection Test Plans and Quality Inspection Tests in Quality Inspector

Attachments in Quality Inspector can be added both to the Quality Inspection Template and a Quality Inspection Test itself. Attachments are crucial for quality inspections by providing both guidance and evidence.

For example, during the design phase, a food processing company might attach a detailed sanitation procedure or ingredient specification sheet to a quality inspection template to ensure operators follow consistent standards. In manufacturing, engineers may link a machine setup diagram or torque specification chart so shop floor staff have clear work instructions; during execution, inspectors can add attachments, such as photos, of weld seams in automotive assembly, scanned copies of calibration certificates for measuring devices, or lab test reports confirming chemical composition. This ensures inspections are not only carried out consistently but also documented with verifiable proof of compliance or failure.

You can add attachments during the design phase (Template) to act as specifications or work instructions, or you can add attachments during the execution phase (Test) to help provide evidence of pass or failure on the test itself.

### Access Template Attachments Without Duplicating Files

Quality Inspector displays shared template attachments directly in the **Template Documents** FactBox on each Quality Inspection Test, without copying the files to individual tests. Updating or replacing an attachment on the template makes the current document available to existing tests through this view, avoiding outdated inspection copies. Use template attachments for shared procedures, drawings, and specifications, and the separate **Attachments** FactBox for evidence specific to an individual inspection.

### Prerequisites

- Use a W1-ENU-Extended base data with “Contoso” sample demo data as a baseline with the “WHITE” location, the “WRB-1002” item, and the “40000” vendor.
- Ensure the Assisted Setup Wizard was run.
- Have a quality inspection test template.
- Have a quality inspection test generation rule.
- Have a quality inspection test for the “WRB-1002” item with a known lot.

 Note: You can add attachments, such as a certificate of analysis, to a test manually by following the instructions on the _[Add Attachments to Test Plans and Tests in Quality Inspector](/kb/quality-inspector/add-attachments-to-test-plans-and-tests-in-quality-inspector/) _page, or automatically by following the instructions on the [_Copy Quality Inspection Attachments Automatically in Quality Inspector_](/kb/quality-inspector/copy-quality-inspection-attachments-automatically-in-quality-inspector/)
 page.

### Steps

1. Navigate to _Quality Inspection Templates_ in Business Central.
2. Select the template chosen for this test and select **Manage**/ **Edit**.
3. Add an attachment in the _Template Attachments_ FactBox (drag and drop the file or use **Attachments**/ **Upload files**).
4. Create a new test for the same template and same item, but for a different lot.
5. Edit the test.
6. Select the _Attachments_ FactBox area.

 Note: There are two attachments areas: _Attachments_ for test-specific attachments, and one _Template Attachments_ for attachments from the template. The template attachment is in the _Template Attachments_ section.

1. Upload an image in the _Attachments_ FactBox (drag and drop the file or use **Attachments**/ **Upload files**).

There is now an attachment specific to the test in the _Attachments_ FactBox section, and the original template attachment in the _Template Attachments_FactBox section.

### Taking a Picture and Attach with a Camera

 Note: Take Picture can be done with the Business Central client, the Business Central phone app, the Business Central tablet app, and the Warehouse Insight app add-on for Quality Inspector.

1. Navigate to _Quality Inspection Tests_in Business Central.
2. Select the Quality Inspection Test and select **Actions**/ **Take Picture**.
3. Take a picture with your camera.
4. The picture will automatically upload and attach to the test as configured in the “Picture Upload Behavior” setting on “Quality Inspector Setup”.

More details on taking pictures can be found here: [https://kb.dmsiworks.com/knowledge-base/take-and-attach-a-picture-to-a-quality-inspection-test/](/kb/quality-inspector/take-and-attach-a-picture-to-a-quality-inspection-test/)

More details on available interfaces for Quality Inspector can be found here: [https://kb.dmsiworks.com/knowledge-base/available-user-interfaces-for-recording-quality-inspections/](/kb/quality-inspector/available-user-interfaces-for-recording-quality-inspections/)
