---
title: "Routing Analysis"
app: "Enhanced Planning Pack"
section: "How-to guides"
last_updated: "2026-08-19"
url: "https://insight-works.com/kb/enhanced-planning-pack/routing-analysis/"
---

# Routing Analysis

Routing Analysis is useful when you want to evaluate **routing performance across multiple finished production orders**, rather than investigate a single production order. It uses historical production results to help identify operations whose actual run times consistently differ from the configured routing times.

This makes Routing Analysis useful for identifying recurring production-time differences and deciding whether the standard times configured on a routing should be reviewed or updated.

The Routing Analysis tool provides statistics on historical routing operation run times, those on finished production orders, to allow for analysis of execution efficiency and variability. Routing Analysis allows you to edit routing operation times.

1. Navigate to _Routing Analysis_in Business Central.
2. Set the following fields as needed:

   - Routing No.
   - Prod. Order Start Date
   - Prod. Order End Date
   - Min. Average Variance
   - Min. Std. Deviation
   - Routing Line Display

 Note: You can add the _Run Time Unit of Measure Code_ field (via Personalize/Design) to the Filter Settings part to filter the routing lines by operation work center UOM.

1. Select **Generate**.
2. Select one of the following values on a line to edit the corresponding routing line value, as needed (the routing may be certified when making changes):

   - Setup Time
   - Run Time
   - Wait Time
   - Move Time

Note: The _Routing Line Display_ filter field is the minimum required field to generate routing lines on the page if set to “All Lines”.

If all other fields (including Routing No.) are left blank or zero, selecting **Generate** returns all routing lines for all routings. This can be useful for you to view and edit the configured operation times for all routings on one page.

If the _Routing Line Display_ filter field is set to “Only Difference”, lines for the operations of the selected routing are displayed only if there is a non-zero difference between actual and expected run times.

Note: The No. Of Prod Orders and calculated column values are based on finished production orders (that used the selected routing) with a Finished Date that satisfies the specified date range on the _Routing Analysis_ page.

The average and percentage difference column values are calculated as follows:

Avg. Actual Run Time = (total run time of all lines / total finished quantity) / total order lines. E.g., for two finished production orders with output quantity of 1 on each and total run time of 8 on operation 40 of both orders, Avg. Actual Run Time = (8 / 2) / 2 = 2.

Avg. Actual Difference = Run Time – Avg. Actual Run Time

% Difference =  (Avg. Actual Difference / Run Time) \* 100

### Routing Analysis vs. Production Order Analysis

Use **Routing Analysis** when you want to compare routing performance across historical finished production orders and identify patterns in actual versus expected operation times.

If you instead need to investigate **one specific production order**, use **Production Order Analysis**. Production Order Analysis compares expected and actual component quantities, setup time, run time, and production costs for the selected production order, including the associated variances.

For more information, see **Analyzing Production Order Variances with Production Order Analysis**.
