- This topic has 6 replies, 5 voices, and was last updated 5 months, 3 weeks ago by Erik G..
-
AuthorPosts
-
11 January 2024 at 9:04 am #8368FTFares T.
Hello,
We’re aiming to deploy Business Central in the next months and currently running through integrated testing and tweaking things to perfection.
We’re looking to deploy the scanner and WHI for a bike maintenance shop. After evaluating the repair needed on the bike and the spare parts needed, the technician will generate a transfer order and then use the scanner to pick all the items on the transfer order. The current process for picking is to
- Scan the bin where the item is
- Scan the item
- Confirm quantity (defaulted to the amount on the transfer order)
We’re looking to see if we can have only one scan instead of two and leverage the “default” bin defined for each of these items. The process would be
- Scan the item
- Confirm the quantity
This might seem small but it will help acceptation a lot as the shop floor technicians will resist every extra step we throw at them with the new ERP.
We’ve also noticed that no scanning is needed at all. One can just double click on the item line, confirm the quantity, and move on, without ever interacting with a bar code. Is it possible to stop that as it would mean the whole process is just smokes and mirror if that option is at their disposal.
Thank you,
Fares
11 January 2024 at 9:27 am #9707FTFares T.It sems like it’s possible, I switched a few “ignore bins” to yes on Warehouse Insight Find Line Templates and it did what I wanted it to do.
I just need to make sure the behaviour is acceptable to warehouse guys since none of the code and documents are specific to the maintenance department (we use the “ship” menu as we’re moving items from a location/zone/bin to another warehouse that represents the spart parts attached to the bikes waiting to be repaired).
Fares
12 January 2024 at 8:21 am #9711TVTerri V.Insight WorksHello Fares,
You can adjust the behavior of each individual application by adjusting settings in the Warehouse Insight Find Line Template for the appropriate application (in your case Pick_Doc). There is an option in the header to not require bin scans called Ignore Bins.
For your second question, if you want to enforce an item scan and not allow users to manually enter the quantity, there is a setting under Scan Behaviors that you can change. You will need to set Scan Required to Always.
Thank you,
1 April 2024 at 8:03 am #9786CKCristy K.Hello All,
I had a similar question to the question about bin scanning.
Currently, when a bin is scanned there is an enter quantity dialogue box that pops up.
In our warehouse, we want the production team to be able to scan a bin and then each scan of that bin makes the quantity go down by one. Therefore, we want to get rid of that manual entry quantity box.
Is that possible?
Currently, it looks like the “scan required” option on the scan behaviors worksheet only works on items and not bins, and when it is on, it still gives a pop up.
Thank you,
Cristy Kennedy
23 July 2024 at 8:45 am #9943TVTerri V.Insight WorksHello Christy,
A request to scan the bin to handle the quantity is an atypical modification.
However, handling the quantity with an item scan would be a configuration change we would recommend as a viable path. The bin scan to handle the item would require a modification which we do not handle through our forums.
Please submit a request to su*****@*******ks.com, including the customer’s name.
Thank you,
29 May 2026 at 4:58 pm #10828CGCarlos G.Hi, I have a similar situation but with lot-tracked items.
When I pick 2 lots from the same bin, the system creates a split line with a blank bin, requiring me to scan the bin again for each new line. Is there a way ( either through Take Bin Handling, Find Line Templates, or any other Device Configuration setting) to have the bin automatically carried over to the split line without requiring an additional scan?
Thanks.
2 June 2026 at 1:25 am #10829EGErik G.Insight WorksHi Carlos,
In Warehouse Insight v2.16 there is a new “Split Line Bin Behavior” setting in the Warehouse FastTab on the Warehouse Insight Device Configuration page. The setting options and behaviours are:
- Clear – When a line is split, the bin code will always be cleared on the new line.
- Clear Whse. Tracked – When a line is split, the bin code will only be cleared on the new line if the item is tracked with lot/serial/package tracking with “Warehouse” tracking enabled on the item tracking code.
- Keep – When a line is split, the bin code will always be retained on the new line.
-
AuthorPosts
- Sign in below to reply.